| 复合型散热硅橡胶研究 |
| |
| 引用本文： | 周文英,李勤,齐暑华,安群力,吴有明.复合型散热硅橡胶研究[J].高分子材料科学与工程,2007,23(4):242-245,249. |
| |
| 作者姓名： | 周文英 李勤 齐暑华 安群力 吴有明 |
| |
| 作者单位： | 1. 西北工业大学理学院应用化学系,陕西,西安,710072
2. 三门峡职业技术学院,河南,三门峡,472000 |
| |
| 摘 要： | 研究了氧化铝和氮化硼粒子用量对硅橡胶热膨胀系数、热稳定性及热导率的影响.发现加入两种填料均显著降低了橡胶热膨胀系数,提高了热稳定性及热导率;试验测试热导率和理论计算值差距较大,用Agari模型分析了两种填料对硅橡胶热导率差异影响的原因.按照一定比例混合这两种填料所得混合填料填充硅橡胶可获得最大热导率及较佳性能.所制备的复合硅橡胶具有很好的物理性能,是作为散热使用的弹性导热垫片的理想材料.
|
| 关 键 词： | 硅橡胶 导热填料 热导率 弹性导热垫片 |
| 文章编号： | 1000-7555（2007）04-0242-04 |
| 修稿时间： | 2006-05-162007-03-27 |
Heat Conductive Composites Silicone Rubber |
| |
| ZHOU Wen-ying,LI Qin,QI Shu-hua,AN Qun-li,WO You-ming.Heat Conductive Composites Silicone Rubber[J].Polymer Materials Science & Engineering,2007,23(4):242-245,249. |
| |
| Authors: | ZHOU Wen-ying LI Qin QI Shu-hua AN Qun-li WO You-ming |
| |
| Abstract: | Composite silicone rubber with good thermal conductivity as elastomeric thermal pads for heat dissipation was prepared using Al2O3 or BN fillers.The examinations of thermal conductivity,coefficient of thermal expansion(CTE) and heat stability of composites indicate that the addition of filler in silicone rubber increases the thermal conductivity,improves heat stability,while,reduces the CTE.The Agari model was employed to analyze the influence of fillers on the formation of conductive chains.Furthermore,hybrid Al2O3 and BN filler is advantageous over single filler for improving thermal conductivity of composites. |
| |
| Keywords: | silieone rubber heat conductive filler thermal conductivity elastomerie thermal pad |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
