| U 型弯板弯曲工艺与模具设计 |
| |
| 引用本文： | 李佳彬.U 型弯板弯曲工艺与模具设计[J].精密成形工程,2017,9(2):107-109. |
| |
| 作者姓名： | 李佳彬 |
| |
| 作者单位： | 煤科集团沈阳研究院有限公司机电分院，沈阳 110000 |
| |
| 摘 要： | 为提高U 型弯板生产效率、取消二次校形工序、方便卸料，设计制作了新结构的弯板弯曲模具。经对新结构的模具进行验证，模具结构合理，可补偿弯曲回弹，方便卸件，且增加了模具长度方向尺寸，一次可弯曲2 件弯板，提高生产效率。
|
| 关 键 词： | U 型弯板 弯曲工艺 模具设计 |
| 收稿时间： | 2017/2/26 0:00:00 |
| 修稿时间： | 2017/3/10 0:00:00 |
Bending Technology and Mould Design of U-shaped Bending Plate |
| |
| LI Jia-bin.Bending Technology and Mould Design of U-shaped Bending Plate[J].Journal of Netshape Forming Engineering,2017,9(2):107-109. |
| |
| Authors: | LI Jia-bin |
| |
| Affiliation: | Shenyang Institute, CCTEG, Shenyang 110000, China |
| |
| Abstract: | The paper aims to improve the production efficiency of the U-shaped bending plate, cancel second shaping process and make unloading convenient. A plate bending mould of new structure was designed, manufactured and verified. Its structure was rational. The bending springback could be compensated and the plate could be removed easily. The length of the mould was increased. Two plates could be put on the mould and bent at a time, so the production efficiency is increased. |
| |
| Keywords: | U-shape plate bending technology mould design |
|
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
