| 弯模间隙对5A06管弯曲横截面畸变及壁厚变化的影响 |
| |
| 引用本文： | 张敬文,鄂大辛,李延民,田鑫.弯模间隙对5A06管弯曲横截面畸变及壁厚变化的影响[J].精密成形工程,2012,4(2):19-22. |
| |
| 作者姓名： | 张敬文 鄂大辛 李延民 田鑫 |
| |
| 作者单位： | 1. 北京理工大学材料学院,北京,100081
2. 首都航天机械公司,北京,100076 |
| |
| 摘 要： | 通过对5A06管材的弯曲实验和不同弯模间隙下的有限元模拟发现:弯管横截面长、短轴变化率和外侧壁厚减薄均随弯曲模间隙的增大而增大,弯管内侧壁厚增厚随弯曲模间隙的增大而减小。采用弯模实际装配间隙进行建模,可获取与实际弯曲更为接近的仿真效果并提高计算精度。
|
| 关 键 词： | 弯模间隙 横截面畸变 壁厚变化 |
| 收稿时间： | 2011/10/23 0:00:00 |
| 修稿时间： | 2012/3/10 0:00:00 |
Effects of Clearance on Cross Sectional Distortion and Wall Thickness Variation of 5A06 Tube |
| |
| ZHANG Jing-wen,E Da-xin,LI Yan-min and TIAN Xin.Effects of Clearance on Cross Sectional Distortion and Wall Thickness Variation of 5A06 Tube[J].Journal of Netshape Forming Engineering,2012,4(2):19-22. |
| |
| Authors: | ZHANG Jing-wen E Da-xin LI Yan-min and TIAN Xin |
| |
| Affiliation: | 1.School of Materials Science and Engineering,Beijing Institute of Technology,Beijing 100081,China;2.Capital Aerospace Machinery Company,Beijing 100076,China) |
| |
| Abstract: | Tube bending tests combined with finite element analysis for 5A06 tubes in different clearances under rotary draw bending are performed.It is revealed that length variation rates of cross section in the major and minor axial directions increase as clearance increases,as well as wall thinning in the outer side of tube.Conversely,wall thickening in the inner side of tube reduces with the accretion of clearance.Simulation results closer to tests are obtained by employing finite element model based on clearance in actual mould assembly,by which a higher computation precision is obtained. |
| |
| Keywords: | clearance cross section distortion wall thickness variation |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
