| 厚壁封头接管热成形的有限元分析与试验研究 |
| |
| 引用本文： | 安红萍,刘建生,程巩固.厚壁封头接管热成形的有限元分析与试验研究[J].精密成形工程,2011,3(6):98-101. |
| |
| 作者姓名： | 安红萍 刘建生 程巩固 |
| |
| 作者单位： | 1. 太原科技大学材料科学与工程学院,太原,030024
2. 二重集团（德阳）重型装备股份有限公司,四川德阳,618013 |
| |
| 基金项目： | 国家科技重大专项(2009ZX04014-062); 山西省研究生优秀创新项目(20093095) |
| |
| 摘 要： | 针对核电容器上的接管采用焊接连接存在的隐患,研究了厚壁封头接管整锻成形技术。采用DEFORM3D软件对壁厚为325mm的大型厚壁封头接管成形过程进行了模拟研究。获得了变形区金属应力变化规律,并对预加工孔径、凹模中心孔等工艺参数进行了分析,研究了其对成形质量的影响并得出相应的优化数据。通过缩比试验验证了有限元分析计算的正...
|
| 关 键 词： | 厚壁封头 接管成形 有限元模拟 试验 |
| 收稿时间： | 2011/10/10 0:00:00 |
| 修稿时间： | 2011/11/10 0:00:00 |
Finite Element Analysis and Experiment Research for Hot Forming of Connection Tube in Thick-wall Head |
| |
| AN Hong-ping,LIU Jian-sheng and CHENG Gong-gu.Finite Element Analysis and Experiment Research for Hot Forming of Connection Tube in Thick-wall Head[J].Journal of Netshape Forming Engineering,2011,3(6):98-101. |
| |
| Authors: | AN Hong-ping LIU Jian-sheng and CHENG Gong-gu |
| |
| Affiliation: | AN Hong-ping1,LIU Jian-sheng1,CHENG Gong-gu2 (1.College of Materials Science and Engineering,Taiyuan University of Science & Technology,Taiyuan 030024,China,2.China Erzhong Machinery Group Company,Deyang 618013,China) |
| |
| Abstract: | The hot forming process of connection tube in a thick-wall head with 325 mm thickness is simulated by DEFORM. Variable law of stress in deformed area is obtained. Processing parameters, such as diameter of pre-holes, center hole of low die, and their effects on forming are researched. Better processing parameters were obtained by simulation. The scale experiment shows that finite element method is correct and the results can provide the scientific base for engineering application of the process. |
| |
| Keywords: | thick-wall head connection tube forming finite element simulation experiment |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
