| 汽车 U 形隔热板冲压回弹控制 |
| |
| 引用本文： | 闻瑶,方笠纬,王成国,宋群超.汽车 U 形隔热板冲压回弹控制[J].精密成形工程,2014,6(5):124-127,131. |
| |
| 作者姓名： | 闻瑶 方笠纬 王成国 宋群超 |
| |
| 作者单位： | 合肥工业大学 材料科学与工程学院, 合肥 230009;合肥工业大学 材料科学与工程学院, 合肥 230009;合肥工业大学 材料科学与工程学院, 合肥 230009;合肥工业大学 材料科学与工程学院, 合肥 230009 |
| |
| 摘 要： | 目的解决隔热板成形常见问题以及预测回弹量的大小。方法以有限元分析软件Dynaform为基础,研究毛坯尺寸、压边力、拉延筋布置以及摩擦因数对隔热板成形性的影响。结果得出了隔热板的较佳成形工艺参数。结论通过修正模具和改善工艺来不断地改善回弹,能准确地预测回弹量的大小。优化后的回弹量分别为Δd=0.918 mm,Δα=0.340°,回弹量得到了有效的控制。
|
| 关 键 词： | U形隔热板 回弹 DYNAFORM 数值模拟 |
| 收稿时间： | 2014/7/10 0:00:00 |
| 修稿时间： | 9/1/2014 12:00:00 AM |
Springback Control in the Forming of U-shaped Thermal Baffle |
| |
| WEN Yao,FANG Li-wei,WANG Cheng-guo and SONG Qun-chao.Springback Control in the Forming of U-shaped Thermal Baffle[J].Journal of Netshape Forming Engineering,2014,6(5):124-127,131. |
| |
| Authors: | WEN Yao FANG Li-wei WANG Cheng-guo and SONG Qun-chao |
| |
| Affiliation: | School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China;School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China;School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China;School of Materials Science and Engineering, Hefei University of Technology, Hefei 230009, China |
| |
| Abstract: | Objective To solve the forming flaws of thermal baffles and to predict the amount of spingback. Methods The effects of blank size,blank holding force,draw bead layout and friction coefficient on the forming quality were studied through simulation based on the finite element analysis software Dynaform. Results The optimal processing parameters of thermal baffle were obtained. Conclusion The size of the springback could be precisely predicted and the effect of springback could be improved through constant mold compensation and process improvement. The springback after optimization was Δd = 0. 918 mm and Δα = 0. 340°,respectively,and the springback could be effectively controlled. |
| |
| Keywords: | U-shaped thermal baffle springback Dynaform numerical simulation |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《精密成形工程》浏览原始摘要信息 |
|
点击此处可从《精密成形工程》下载全文 |
|
