| Kevlar/Surlyn复合材料的制备与防刺性能研究 |
| |
| 引用本文： | 晏义伍,曹海琳,赵金华.Kevlar/Surlyn复合材料的制备与防刺性能研究[J].功能材料,2012,43(17):2351-2355. |
| |
| 作者姓名： | 晏义伍 曹海琳 赵金华 |
| |
| 作者单位： | 1. 深圳航天科技创新研究院深圳市复合材料重点实验室,广东深圳,518057
2. 深圳航天科技创新研究院深圳市复合材料重点实验室,广东深圳518057／哈尔滨工业大学化工学院,黑龙江哈尔滨150001 |
| |
| 基金项目： | 深圳市科技计划资助项目 |
| |
| 摘 要： | 采用模压法制备Kevlar/Surlyn复合材料,通过研究模压温度、压力、时间等工艺参数对复合材料性能的影响,确定了最佳制备工艺,模压温度170℃,模压压力3MPa,模压时间30min。研究了树脂含量对复合材料防刺性能的影响规律,结果表明Surlyn树脂含量对复合材料的防刺性能影响显著。树脂含量为47%(质量分数)时,复合材料防刺效果最优。
|
| 关 键 词： | Kevlar纤维 Surlyn树脂 复合材料 防刺性能 |
Preparation and stab resistance of Kevlar/Surlyn composites |
| |
| YAN Yi-wu,CAO Hai-lin,ZHAO Jin-hua.Preparation and stab resistance of Kevlar/Surlyn composites[J].Journal of Functional Materials,2012,43(17):2351-2355. |
| |
| Authors: | YAN Yi-wu CAO Hai-lin ZHAO Jin-hua |
| |
| Affiliation: | 1(1.Shenzhen Key Laboratory of Composite Materials, Shenzhen Academic of Aerospace Technology,Shenzhen 518057,China; 2.School of Chemical Engineering and Technology,Harbin Institute of Technology,Harbin 150001,China) |
| |
| Abstract: | Kevlar/Surlyn composites were fabricated by mould pressing.The effects of pressing temperature,pressure,time and resin content on properties of composites were studied.The results show that the optimum proceeding condition is pressing temperature 170℃,pressure 3MPa,holding time 30min.Resin content has important effect on stab resistant property of composite.The optimum resin content was 47wt%. |
| |
| Keywords: | Kevlar fiber Surlyn resin composites stab resistant property |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
