| 陶瓷微珠包覆铜的制备及激光光谱特性研究 |
| |
| 引用本文： | 傅成武,张拴勤,孟俊芳,陈明清.陶瓷微珠包覆铜的制备及激光光谱特性研究[J].功能材料,2012,43(1):14-16,20. |
| |
| 作者姓名： | 傅成武 张拴勤 孟俊芳 陈明清 |
| |
| 作者单位： | 1. 江南大学化学与材料工程学院,江苏无锡,214122
2. 总装工程兵科研一所,江苏无锡,214035 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 采用化学镀方法制备了陶瓷微珠包覆铜复合材料,通过SEM、XRD和EDS研究了还原剂浓度对陶瓷微珠包覆铜的形貌及包覆情况的影响,得出了最佳包覆条件。采用近红外分光光度计、CO2激光器和激光能量计检测了不同硫酸铜浓度下陶瓷微珠包覆铜在1.06μm附近的光谱反射率和10.6μm的激光反射率,随硫酸铜浓度的增大,1.06μm附近的光谱反射率和10.6μm的激光反射率下降。
|
| 关 键 词： | 陶瓷微珠包覆铜 1.06μm光谱反射性能 10.6μm的激光反射率 |
Fabrication and spectral properties of ceramic cenospheres coated with Cu |
| |
| FU Cheng-wu,ZHANG Shuan-qin,MENG Jun-fang,CHEN Ming-qing.Fabrication and spectral properties of ceramic cenospheres coated with Cu[J].Journal of Functional Materials,2012,43(1):14-16,20. |
| |
| Authors: | FU Cheng-wu ZHANG Shuan-qin MENG Jun-fang CHEN Ming-qing |
| |
| Affiliation: | 1(1.School of Chemical and Material Engineering,Jiangnan University,Wuxi 214122,China; 2.The First Engineers Scientific Research Institute of the General Armaments Department,Wuxi 214035,China) |
| |
| Abstract: | Chemical plating method was used to fabricate ceramic cenospheres coated with Cu in this paper.SEM,XRD and EDS were applied to analyze the morphology and the state of the coated ceramic cenospheres,and the optimum volume concentration of reductant was determined.The 1.06 and 10.6μm laser reflectivity were measured by infrared spectrometer,CO2 laser scanner and energy meter.With increasing the CuSO4 concentration,the 1.06 and 10.6μm laser reflectivity decreased correspondingly. |
| |
| Keywords: | ceramic cenospheres coated with Cu 1 06μm spectral reflectivity 10 6μm laser reflectivity |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
