首页 | 本学科首页   官方微博 | 高级检索  
     

PMSZT压电陶瓷的烧结工艺研究
引用本文:陆翠敏,孙清池,徐明霞.PMSZT压电陶瓷的烧结工艺研究[J].功能材料,2005,36(6):948-951.
作者姓名:陆翠敏  孙清池  徐明霞
作者单位:天津大学,材料科学与工程学院,天津,300072
基金项目:ProjectsupportedbyNationalNaturalScienceFoundationofChina(10232030),KeyLaboratoryforAdvancedCeramicsandMachiningTechnologyofMinistryofEducationofTianjinUniversity(x06050)
摘    要:研究保温时间对PMSZT压电陶瓷的相组成、显微结构及电性能的影响。结果发现,烧结温度1240℃保温1h时,密度达极值7.83g/cm^3。保温1h的试样,晶粒致密均匀,居里温度最低。随着保温时间的缩短或延长,居里温度增加。电性能在保温1h时达最佳,ε33^T/ε0=1700,d33=336pC/N,Kp=0.655,Qm=2200,tgδ=0.0030。

关 键 词:PMSZT压电陶瓷  保温时间  相组成  显微结构  电性能

Sintering technology of PMSZT piezoelectric ceramics
LU Cui-min,SUN Qing-chi,XU Ming-xia.Sintering technology of PMSZT piezoelectric ceramics[J].Journal of Functional Materials,2005,36(6):948-951.
Authors:LU Cui-min  SUN Qing-chi  XU Ming-xia
Abstract:The effects of soaking time on crystallographic phase, microstructure and electric-properties of Pb(Mn1/3 Sb2/3 )0.05 Zr0.47Ti0.48O3 (PMSZT) piezoelectric ceramics have been studied in the paper. X-ray diffraction (XRD) results demonstrated that the pure perovskite structure was obtained and no pyrochlore phase was detected for PMSZT samples sintered at 1240℃ for different soaking time. Scanning electron microscopy (SEM) revealed that grains grew up homogeneously and developed well with soaking time of 1h. The sintered density reached its maximum value of 7.83g/cm3 and a well-situated property of εT33/ε0 (1700), d33(336pC/N) , Kp (0.62), Qm (2200), tgδ(0. 0030) were obtained at sintering of 1240℃ for 1h. The Curie temperature had a minimum value with soaking time of 1h. When soaking time prolonging or shortening, the Curie temperature moved to a high temperature.
Keywords:PMSZT piezoelectric ceramics  soaking time  crystallographic phase  microstructure  electric-properties
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号