首页 | 本学科首页   官方微博 | 高级检索  
     

基于ANSYS的温控包装圆柱体模型的建立
引用本文:赵艳冰,钱 静.基于ANSYS的温控包装圆柱体模型的建立[J].包装工程,2012,33(9):18-22.
作者姓名:赵艳冰  钱 静
作者单位:江南大学
摘    要:为简化温控包装设计计算,对实际温控包装系统建立了不同的圆柱体模型。将实际温控包装箱尝试向不同圆柱体模型转化,使其设计方法更简便易行,借助ANSYS软件对其进行了热传递分析和数值模拟,利用转换模型的温控时间与实际温控系统的温控时间之间的相对误差,对各模型进行了筛选。结果表明,采用的圆柱体模型与原立方体温控包装箱的内体积、厚度相等时,最能真实反映实际保温箱的传热过程。为降低包装成本、优化温控包装设计方案提供了依据。

关 键 词:温控包装  圆柱体模型  ANSYS  保温时间
收稿时间:2012/1/10 0:00:00
修稿时间:2012/5/10 0:00:00

Establishment of Cylinder Models for Temperature Control Packages Based on ANSYS
ZHAO Yan-bing and QIAN Jing.Establishment of Cylinder Models for Temperature Control Packages Based on ANSYS[J].Packaging Engineering,2012,33(9):18-22.
Authors:ZHAO Yan-bing and QIAN Jing
Affiliation:(Jiangnan University,Wuxi 214000,China)
Abstract:Several cylinder models were established to simplify the design of temperature control package.Real temperature control package was transfer to different cylinder models to simplify design.Thermal transfer analysis and simulation were carried out using ANSYS.The relative error of temperature control time between transfer models and real temperature control system were used to select the best cylinder model.The result showed that the one who’s inside volume and thickness is equal with real cubic temperature control package can reflect the real heat transfer process best.The purpose was to provide reference for reducing cost and optimizing temperature control package design.
Keywords:temperature control package  cylinder model  ANSYS  temperature holding time
本文献已被 CNKI 等数据库收录!
点击此处可从《包装工程》浏览原始摘要信息
点击此处可从《包装工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号