首页 | 本学科首页   官方微博 | 高级检索  
     

基于马歇特锤实验的聚氨酯缓冲性能分析
引用本文:齐明思,孙亮.基于马歇特锤实验的聚氨酯缓冲性能分析[J].包装工程,2016,37(3):108-110.
作者姓名:齐明思  孙亮
作者单位:中北大学,太原,030051;中北大学,太原,030051
基金项目:山西省自然科学基金 (2013011025-1)
摘    要:目的为了测试聚氨酯材料的缓冲性能,设计合适的环阻尼缓冲防护结构,从而使系统有更好的缓冲性能和稳定性。方法以某高过载测试电子记录器中环阻尼缓冲防护结构为例,建立了有阻尼的质量弹簧系统数学模型,通过动态马歇特锤实验对钢壳内侧壁与内胆盖外侧壁、内胆外侧壁之间灌封的聚氨酯材料的缓冲性能进行了分析研究。结果马歇特锤分别打10个、17个和20个齿时,均是直径为46 mm的内胆最大加速度值最小。结论螺距相同时,直径为46 mm的内胆相对于钢壳运动的位移幅值最小,为最优设计方案。

关 键 词:缓冲性能  高过载  聚氨酯  马歇特锤实验
收稿时间:2015/7/14 0:00:00
修稿时间:2016/2/10 0:00:00

Buffer Performance of Polyurethane Based on the Machete Hammer Experiment
QI Ming-si and SUN Liang.Buffer Performance of Polyurethane Based on the Machete Hammer Experiment[J].Packaging Engineering,2016,37(3):108-110.
Authors:QI Ming-si and SUN Liang
Abstract:The aim of this work was to test the cushioning property of polyurethane material, design appropriate ring damping buffer protection structure, so as to improve the buffer performance and stability of the system. Using a high overload test electronic recorder central damping buffer door structure as an example, damped mass spring system mathematical model was established, and the buffer performance of polyurethane material filled between the steel shell inner wall and the inner liner cover lateral wall as well as between the lateral walls of the inner container potting material was studied and analyzed through dynamic Machete hammer experiment. When the Machete hammer hit 10, 17, and 20 teeth, the minimum acceleration was all observed with the inner diameter of 46 mm. At the same pitch, the liner with a diameter of 46 mm had the smallest movement displacement relative to steel shell, and was the best design scheme.
Keywords:
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《包装工程》浏览原始摘要信息
点击此处可从《包装工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号