| 基于SolidWorks的托盘结构有限元分析及优化设计 |
| |
| 引用本文： | 李杨,李光.基于SolidWorks的托盘结构有限元分析及优化设计[J].包装工程,2011,32(19):1-4. |
| |
| 作者姓名： | 李杨 李光 |
| |
| 作者单位： | 天津科技大学,天津,300222;天津科技大学,天津,300222 |
| |
| 基金项目： | 天津科技大学自然科学基金资助项目(20100202) |
| |
| 摘 要： | 托盘结构设计一直采用经验设计方法,其结构的合理性有待研究。通过SolidWorks对托盘进行了建模和参数化设计,并运用其集成的Simulation仿真分析功能对所建立的模型进行了有限元分析。通过与托盘试验原型测试对比,验证了分析的正确性和有效性。最后通过SolidWorks的优化功能对托盘模型进行了优化设计,得到了以安全系数为约束条件的托盘上连板的最优厚度。该方法可行、有效,为托盘结构分析和优化设计提供了一条新的思路。
|
| 关 键 词： | 托盘 有限元分析 试验验证 优化设计 |
| 收稿时间： | 2011/7/25 0:00:00 |
| 修稿时间： | 2011/10/10 0:00:00 |
Structural Finite Element Analysis and Optimum Design of Pallet Via SolidWorks |
| |
| LI Yang and LI Guang.Structural Finite Element Analysis and Optimum Design of Pallet Via SolidWorks[J].Packaging Engineering,2011,32(19):1-4. |
| |
| Authors: | LI Yang and LI Guang |
| |
| Affiliation: | LI Yang,LI Guang(Tianjin University of Science and Technology,Tianjin 300222) |
| |
| Abstract: | Structural design of pallet always uses empirical method,and its rationality needs further investigation.The modeling and parameterized design of pallet was carried out by using Solidworks,and then finite element analysis of the model was carried on by using its integration function.The analytical results were validated with the prototype test of pallet.Ultimately,the optimum design of pallet was processed via the optimization toolbox of SolidWorks,and the best thickness of top deckboards for pallet was obt... |
| |
| Keywords: | pallet finite element analysis verification optimum design |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《包装工程》浏览原始摘要信息 |
|
点击此处可从《包装工程》下载全文 |
