SiO_2改性环氧树脂灌封材料

本文以SiO2作为增强材料,制备了SiO2/环氧树脂灌封材料,研究了不同的SiO2含量和热处理工艺条件对灌封材料性能的影响。实验发现,SiO2的加入对环氧树脂灌封材料的拉伸强度和体积电阻率有显著影响,SiO2含量为3%时环氧树脂灌封材料的拉伸强度达到最大值,并且其体积电阻率亦达到最大值;随着固化温度的提高,SiO2/环氧树脂灌封材料的体积电阻率不断减小,力学性能则先升后降,在固化温度为150℃时其力学性能最好。实验结果表明:SiO2含量为3%,固化温度为150℃时,SiO2/环氧树脂灌封材料的综合性能最好,其拉伸强度为1.6MPa,弹性模量为0.44GPa,体积电阻率为3.26×1013(Ω·cm)。

Modification of Epoxy Resin Encapsulating Materials with SiO_2

Epoxy resin encapsulating materials were prepared with SiO_2, in order to enhance the mechanical properties of materials. At the same times, the effect of the content of SiO_2 and the condition of heat treatment on the properties of the encapsulating materials was studied. The results suggested that the tensile strength and the volume resistivity of the encapsulating materials were effected observably by the content of SiO_2. When the content of SiO_2 was 3%, the tensile strength and the volume resistivity ...