| WC对CuNiSiB喷焊覆层材料耐气蚀性的影响 |
| |
| 引用本文： | 康进兴,赵文轸,肖洁.WC对CuNiSiB喷焊覆层材料耐气蚀性的影响[J].材料科学与工程学报,2002,20(1):44-46. |
| |
| 作者姓名： | 康进兴 赵文轸 肖洁 |
| |
| 作者单位： | 1. 空军工程大学工程学院,西安,710038
2. 西交通大学金属材料强度国家重点实验室,西安,710049 |
| |
| 基金项目： | 国家自然科学基金资助项目 (59831 0 30 ) |
| |
| 摘 要： | 在CuNiSiB自熔合金粉末中添加不同量的硬质WC陶瓷颗粒 ,利用氧乙炔焰粉末喷焊工艺制备覆层材料 ,用超声波振动气蚀仪对覆层材料进行耐气蚀性能实验 ,用扫描电子显微镜对覆层表面气蚀破坏形貌进行观察。结果表明 :复合覆层材料的耐气蚀能力比基体强 ,且随着WC颗粒加入量的增加 ,耐气蚀能力逐渐增大 ;提高CuNiSiB覆层材料耐气蚀能力的途径是强化晶界。该文还探讨了覆层材料的气蚀机理
|
| 关 键 词： | WC 喷焊 复合材料 表面防护 气蚀 |
| 文章编号： | 1004-793(2002)01-0044-03 |
| 修稿时间： | 2001年7月12日 |
Effect of WC on Cavitation Erosion Resistance of Spray WeldingCoating of CuNiSiB Alloy Powder |
| |
| KANG Jin\|xing\,ZHAO Wen\|zhen\,XIAO Jie\.Effect of WC on Cavitation Erosion Resistance of Spray WeldingCoating of CuNiSiB Alloy Powder[J].Journal of Materials Science and Engineering,2002,20(1):44-46. |
| |
| Authors: | KANG Jin\|xing\ ZHAO Wen\|zhen\ XIAO Jie\ |
| |
| Affiliation: | KANG Jin\|xing\+1,ZHAO Wen\|zhen\+2,XIAO Jie\+1 |
| |
| Abstract: | Different content WC particle were added in CuNiSiB self\|fluxing alloy powder.The coating were made by using flame spray welding method.The cavitation ersoion were inverstigated by ultrasonic vibration cavitation equipment.The cavitation erosion morphology were observed by SEM.Results showed that the cavitation erosion resistance of composite coating is better than CuNiSiB alloy,and enhance with increasing WC content.That raising cavitation erosion resistance of CuNiSiB coating method is to reinforce grain boundary.Cavitation erosion mechanisms of the test coatings were also discussed. |
| |
| Keywords: | WC spray welding composite surface protection cavitation erosion |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
