首页 | 本学科首页   官方微博 | 高级检索  
     

三维表面粗糙度的均一性研究
引用本文:李成贵,张国雄,袁长良.三维表面粗糙度的均一性研究[J].计量学报,1999,20(1):32-36.
作者姓名:李成贵  张国雄  袁长良
作者单位:1. 天津大学,天津,300072
2. 太原工业大学,太原,030024
摘    要:基于分形几何理论,通过分析各种机加工表面的轮廓谱矩和表面谱矩的关系,给出了三维表面形貌的均一性定义和定量评价方法。实验表明:精车和平磨工件的高度,斜度均一性较好,而镗和铣加工表面高度,斜率的均一性都比较差;刨加工表面的高度均一性较好,但斜率均一性较差。

关 键 词:表面粗糙度  表面形貌  分形几何  均一性

Evaluation of the Homogeneity of 3-D Surface Topography
Li Chenggui,Zhang Guoxiong,Yuan Changliang.Evaluation of the Homogeneity of 3-D Surface Topography[J].Acta Metrologica Sinica,1999,20(1):32-36.
Authors:Li Chenggui  Zhang Guoxiong  Yuan Changliang
Abstract:The homogeneity of surface topography influences the function performance of the machined surface greatly. Through the analysis of the profile spectral moments and the surface moments, a quantitative evaluation method is proposed, which is based on the application of fractal geometry theory. By the FFT of the discreate data of the profile measured by a Talysurf-10 stylus instrument, we obtained the power spectrum and the fractal dimension of the profile. Furthermore, the zero and the 2nd order spectral moments of the profile are found. Using these parameters, the evaluation method is processed. This study shows that the height and the slope distribution of the surface machined by finishing turning and grinding are homogeneous, and that of the surface machined by boring and milling are not. The height distribution of the surface machined by planing is homogeneous, but the slope distribution is not.
Keywords:Roughness  Surface topography  Fractal geometry  Homogeneity  
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号