| 光学系统设计中降低公差灵敏度的方法 |
| |
| 引用本文： | 张远健,唐勇,王鹏,李英超,朱大略,孙浩,柴利飞,陈宝莹.光学系统设计中降低公差灵敏度的方法[J].光电工程,2011(10):127-133. |
| |
| 作者姓名： | 张远健 唐勇 王鹏 李英超 朱大略 孙浩 柴利飞 陈宝莹 |
| |
| 作者单位： | 长春理工大学光电工程学院;吉林东光集团东光精密机械厂; |
| |
| 摘 要： | 基于初级像差理论提出了一种降低系统公差灵敏度的方法,即通过控制光学系统各元件表面的初级像差值以“小像差互补”达到像差平衡.首先阐明“小像差互补”含义,然后通过理论公式指出了初级像差与公差灵敏度的关系,最后举出一个航空相机光学系统的设计实例,通过对其“大像差互补”与“小像差互补”两种设计结果进行公差分析,结果表明利用“小...
|
| 关 键 词： | 小像差互补 航空相机物镜 光学设计 初级像差理论 |
Method of Tolerance Sensitivity Reduction of Optical System Design |
| |
| ZHANG Yuan-jian,TANG Yong,WANG Peng,LI Ying-chao,ZHU Da-lue,SUN Hao,CHAI Li-fei,CHEN Bao-ying.Method of Tolerance Sensitivity Reduction of Optical System Design[J].Opto-Electronic Engineering,2011(10):127-133. |
| |
| Authors: | ZHANG Yuan-jian TANG Yong WANG Peng LI Ying-chao ZHU Da-lue SUN Hao CHAI Li-fei CHEN Bao-ying |
| |
| Affiliation: | ZHANG Yuan-jian1,TANG Yong1,WANG Peng2,LI Ying-chao2,ZHU Da-lue2,SUN Hao1,CHAI Li-fei1,CHEN Bao-ying1 (1.Department of Optoelectronic Engineering,Changchun University of Science and Technology,Changchun 130012,China,2.DongGuang Factory of Precision and Machinery of JiLin DongGuang Group,Changchun 130103,China) |
| |
| Abstract: | A method by controlling the primary aberration of each surface in the system based on Seidel aberration theory is proposed for reducing system tolerance sensitivity.First of all,it illustrates the principle of small aberrations balancing,and then the relation of the Seidel aberration theory and tolerance sensitivity is indicated by theoretical formula.At last,we enumerate an example which is the optical design of objective lens of aerial camera and make tolerances analysis both on the compensation of big ab... |
| |
| Keywords: | compensation of small aberration objective lens of aerial camera optical design seidel aberration theory |
| 本文献已被 CNKI 等数据库收录！ |
|
