首页 | 本学科首页   官方微博 | 高级检索  
     

立体视觉测量系统的空间分辨力和结构参数设置
引用本文:李召鑫,李海峰,郑臻荣,刘旭. 立体视觉测量系统的空间分辨力和结构参数设置[J]. 光电工程, 2012, 39(1): 48-53
作者姓名:李召鑫  李海峰  郑臻荣  刘旭
作者单位:李召鑫:浙江大学现代光学仪器国家重点实验室,杭州 310027
李海峰:浙江大学现代光学仪器国家重点实验室,杭州 310027
郑臻荣:浙江大学现代光学仪器国家重点实验室,杭州 310027
刘旭:浙江大学现代光学仪器国家重点实验室,杭州 310027
基金项目:中央高校基本科研业务费专项资金资助 (2010XZZX002-8)
摘    要:立体视觉测量系统的空间分辨力随着物体的空间位置和移动方向的变化而变化,系统的空间分辨力高低在很大程度上会影响整个系统的测量精度。本文根据立体视觉测量系统的成像公式,对整个系统观察范围内的所有空间点的空间分辨力进行了详细分析与计算。结果表明,两个 CCD夹角在 80°~100°时系统的空间分辨力最高,并且 X方向的空间分辨力整体上高于 Y方向, Z方向的空间分辨力变化相对较小,最终的实验结果和仿真结果相吻合,根据系统空间分辨力的分布规律,本文制定出了制出了空间分辨力最优的立体视觉系统的参数设置方案。

关 键 词:立体视觉  视觉测量  空间分辨力  结构参数
收稿时间:2011-07-16

Space Resolution and Structural Parameters of Stereo Vision System
LI Zhao-xin,LI Hai-feng,ZHENG Zhen-rong,LIU Xu. Space Resolution and Structural Parameters of Stereo Vision System[J]. Opto-Electronic Engineering, 2012, 39(1): 48-53
Authors:LI Zhao-xin  LI Hai-feng  ZHENG Zhen-rong  LIU Xu
Affiliation:(State Key Laboratory Modern Optical Instrumentation,Zhejiang University,Hangzhou 310027,China)
Abstract:The space resolution of stereo vision system affects the accuracy of the measurement. The space resolution differs at different points and in different directions at the same point. Based on the formula of the stereo vision system, the space resolution of all the points is calculated and analyzed in observation field. The results show the space resolution is the highest with axis angle between 80°and 100°. And the space resolution in the X direction is higher than that in the Y direction. The experiment result is similar to the analysis result. Finally, we get the best structural parameters of stereo vision system according to the space resolution.
Keywords:stereo vision  vision measurement  space resolution  structural parameters
本文献已被 CNKI 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号