首页 | 本学科首页   官方微博 | 高级检索  
     

线接触作用下超薄膜-基底界面力学分析
引用本文:聂重阳,郑德志,古乐,张弛,王黎钦.线接触作用下超薄膜-基底界面力学分析[J].工程力学,2017,34(12):202-209.
作者姓名:聂重阳  郑德志  古乐  张弛  王黎钦
作者单位:哈尔滨工业大学航空宇航摩擦学研究室, 哈尔滨 150001
基金项目:国家自然科学基金项目(51275125,U1537214,51475452);国家重点基础研究发展规划项目(973)(2013CB632305)
摘    要:高副接触的摩擦部件中广泛使用1 μm左右的超薄膜,其界面失效对部件的工作寿命具有重要影响。该文针对轴承钢基底表面1 μm厚度的硬质和软质超薄膜所构成的膜基系统,建立了线接触载荷作用下的界面力学分析模型。采用复变函数镜像法求解了单元点力的格林函数解,并积分获得了界面应力的分布状态。利用匀质模型完成了退化对比验证,以DLC和MoS2两种硬软固体薄膜的线接触为例进行了计算和分析。该方法可用于机械部件表面沉积超薄膜的膜基界面分析与设计。

关 键 词:界面力学    复变函数    镜像法    超薄膜    线接触
收稿时间:2016-08-23

INTERFACE MECHANICAL ANALYSIS OF ULTRA THIN FILM-SUBSTRATE SYSTEM UNDER THE LINEAR CONTACT
Affiliation:Research Lab of Space and Aerospace Tribology, Harbin Institute of Technology, Harbin 150001, China
Abstract:Ultra-thin films of about 1 μm are widely used in friction pairs with point/line-contact, and their interfacial failures have significant effects on the service life of frictional components. An interface mechanical model of film-substrate system with hard or soft thin films deposited on the bearing steel surfaces is built to analyze the interface stresses and deformations under the linear contact. Using image method of complex function, the solution of unit point force is obtained as the Green's function for evaluating and integrating. The model is verified as a degradation of homogeneous material. The distribution states of interface stresses for a cylindrical contact with DLC and MoS2 of hard and soft films are calculated and discussed. This model can be used for interfacial analysis and design in the mechanical components with ultra-thin films.
Keywords:
本文献已被 CNKI 等数据库收录!
点击此处可从《工程力学》浏览原始摘要信息
点击此处可从《工程力学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号