| 楔形工字梁抗剪极限承载力试验研究 |
| |
| 引用本文： | 郑悦,童根树,金阳.楔形工字梁抗剪极限承载力试验研究[J].工程力学,2012(8):269-275. |
| |
| 作者姓名： | 郑悦 童根树 金阳 |
| |
| 作者单位： | 浙江大学城市学院土木系;浙江大学建筑工程学院 |
| |
| 基金项目： | 浙江省城乡建设厅项目(ZC201139) |
| |
| 摘 要： | 该文介绍了楔形变截面工字钢短梁的抗剪承载力试验,与有限元结果进行了对比,提出了将楔形变截面梁的承载力按等截面梁的承载力乘以楔率折减系数的计算方法,与试验和扩充的有限元计算结果对比表明:公式有很好的精度。
|
| 关 键 词： | 剪切屈曲 屈曲后强度 变截面梁 抗剪承载力 有限元 |
EXPERIMENTAL STUDY ON SHEAR CAPACITY OF I-BEAMS WITH TAPERED WEBS |
| |
| ZHENG Yue,TONG Gen-shu,JIN Yang.EXPERIMENTAL STUDY ON SHEAR CAPACITY OF I-BEAMS WITH TAPERED WEBS[J].Engineering Mechanics,2012(8):269-275. |
| |
| Authors: | ZHENG Yue TONG Gen-shu JIN Yang |
| |
| Affiliation: | 1.Department of Civil Engineering,Zhejiang University City College,Hangzhou 310015,China;(2.College of Civil Engineering and Architecture,Zhejiang University,Hangzhou 310058,China) |
| |
| Abstract: | The paper reported an experimental study on the post-buckling shear strength of I-sectional beams with tapered webs.The comparison with FEM(Finite Element Method) analysis is carried out and reasonable agreement between the test and the FEA(Finite Element Analysis) is observed.A design formula is proposed that the post-buckling shear strength is determined by multiplying the counterpart of the uniform beam by a taper reduction factor.The comparison with test and expanded FEM analysis shows an excellent effectiveness of the proposed formula. |
| |
| Keywords: | shear bucking post-buckling strength tapered beam shear capacity finite element |
| 本文献已被 CNKI 等数据库收录！ |
