| 子模型法在超大跨悬索桥钢箱梁应力分析中的应用 |
| |
| 引用本文： | 李爱群,王浩.子模型法在超大跨悬索桥钢箱梁应力分析中的应用[J].工程力学,2007,24(2):80-84. |
| |
| 作者姓名： | 李爱群 王浩 |
| |
| 作者单位： | 东南大学土木工程学院,江苏,南京,210096 |
| |
| 基金项目： | 国家自然科学基金
,
国家自然科学基金
,
高校科技创新工程项目
,
东南大学校科研和教改项目 |
| |
| 摘 要： | 以国内第一大跨桥梁——润扬长江公路大桥南汊悬索桥为背景,在对大桥整体结构进行非线性有限元分析的基础上,运用子模型法计算了该桥扁平钢箱梁各关键部位的应力。与实测数据的对比表明:子模型法计算结果准确可靠,能够较真实的反映大桥钢箱梁在各种工况下的受力状态,是分析超大跨悬索桥钢箱梁应力水平及其分布的有效方法。最后分析了该桥钢箱梁的受力特点,为同类流线形扁平钢箱梁的应力分析和设计提供参考依据。
|
| 关 键 词： | 超大跨悬索桥 钢箱梁 子模型法 有限元 应力分析 |
| 文章编号： | 1000-4750（2007）02-0080-05 |
| 修稿时间： | 2005-07-012006-02-18 |
STRESS ANALYSIS ON STEEL BOX GIRDERS OF SUPER-LONG-SPAN SUSPENSION BRIDGES WITH SUBMODEL METHOD |
| |
| LI Ai-qun,WANG Hao.STRESS ANALYSIS ON STEEL BOX GIRDERS OF SUPER-LONG-SPAN SUSPENSION BRIDGES WITH SUBMODEL METHOD[J].Engineering Mechanics,2007,24(2):80-84. |
| |
| Authors: | LI Ai-qun WANG Hao |
| |
| Affiliation: | College of Civil Engineering, Southeast University, Nanjing, Jiangsu 210096, China |
| |
| Abstract: | A 3-dimensional, Finite Element, full model for the Runyang Suspension Bridge, the longest bridge in China was established and analyzed. The submodel of the steel box girder was then particularly established based on the analyzed results considering the connection of the two models. The local stresses of the steel box girder under various load conditions were calculated with the submodel. The calculation stress values were found to be reliable by comparing with the field measurements and the submodel method was proved to be effective on analyzing the stress levels and distributions of steel box girders of super-long-span suspension bridges. Finally the working behaviors and mechanical characteristics of the steel box girder of the Runyang Suspension Bridge were analyzed. The analysis results could provide theoretical references for analyzing the steel box girders of super-long-span suspension bridges. |
| |
| Keywords: | super-long-span suspension bridge steel box girder submodel method FE stress analysis |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
