High electrical properties of W-additive Mn-modified PZT–PMS–PZN ceramics for high power piezoelectric transformers

The ceramics were prepared successfully by the addition of WO₃ to the Mn-modified Pb(Zr_0.52Ti_0.48)O₃–Pb(Mn_1/3Sb_2/3)O₃–Pb(Zn_1/3Nb_2/3)O₃ (PZT–PMS–PZN) for high power piezoelectric transformers application. XRD analysis indicated that the ceramics were mainly composed of a tetragonal phase in the range of 0–1.0 wt.% WO₃ addition. The grain size of the ceramics significantly decreased from 10.0 to 2.9 μm by addition of WO₃. Moreover, the addition of WO₃ promoted densification of the ceramics and increased mechanical quality factor (Q_m), planar coupling factor (K_p) and piezoelectric constant (d₃₃) kept high values, whereas, dielectric loss (tan δ) was low. Δf (=f_a ? f_r) slightly changed when WO₃ addition was above 0.5 wt.%. The ceramics with 0.6 wt.% WO₃ addition, sintered at 1150 °C showed the optimized piezoelectric and dielectric properties with Q_m of 1852, K_p of 0.58, d₃₃ of 243 pC/N and tan δ of 0.0050. The ceramics are promising candidates for high power piezoelectric transformers application.