| 均质钽2.5钨合金加工工艺研究 |
| |
| 引用本文： | 汪凯,李兆博,张亚军,李积贤.均质钽2.5钨合金加工工艺研究[J].材料开发与应用,2017,32(5). |
| |
| 作者姓名： | 汪凯 李兆博 张亚军 李积贤 |
| |
| 作者单位： | 1. 稀有金属特种材料国家重点实验室,宁夏石嘴山753000;中色(宁夏)东方集团有限公司,宁夏石嘴山753000;2. 中色(宁夏)东方集团有限公司,宁夏石嘴山,753000 |
| |
| 摘 要： | 采用"锻造+多向轧制"工艺,研究了均质钽2.5钨合金材料在不同方向、不同部位和不同热处理工艺条件下的拉伸性能和显微组织,最终确定了均质钽2.5钨合金的加工工艺。
|
| 关 键 词： | 钽2.5钨合金 轧制 热处理 力学性能 微观组织 各向同性 |
Research on Processing Technique of Homogeneous Tantalum 2.5 Tungsten Alloy |
| |
| WANG Kai,LI Zhaobo,ZHANG Yajun,LI Jixian.Research on Processing Technique of Homogeneous Tantalum 2.5 Tungsten Alloy[J].Development and Application of Materials,2017,32(5). |
| |
| Authors: | WANG Kai LI Zhaobo ZHANG Yajun LI Jixian |
| |
| Abstract: | Homogeneous tantalum 2.5 tungsten alloy was prepared by forging and clock rolling.Tensile properties and microstructure of samples of different orientations,from different positions and prepared by different heat treatments were researched.Based on the tests results,the processing technology was determined. |
| |
| Keywords: | Tantalum 2 5 tungsten alloy rolling heat treatment mechanical property microstructure isotropy |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
