| 平晶检定时干涉条纹的快速调整方法与平面度计算 |
| |
| 引用本文： | 宫美望,刘文君.平晶检定时干涉条纹的快速调整方法与平面度计算[J].工业计量,2007,17(5):8-11. |
| |
| 作者姓名： | 宫美望 刘文君 |
| |
| 作者单位： | 1. 青岛市计量测试所,山东,青岛,266071
2. 青岛市水利勘测设计院有限公司,山东,青岛,266023 |
| |
| 摘 要： | 在平面等厚干涉仪上检定平晶工作面平面度时,需要在被检区域调整出3到5条干涉条纹,依据测量原理和计算公式求出被检平晶工作面的平面度.文章重点分析干涉条纹的快速调整方法与标准平晶平面度的正确引用方法.
|
| 关 键 词： | 等厚干涉 干涉条纹 调整方法 平面度 计算 |
| 文章编号： | 1002-1183（2007）05-0008-04 |
| 收稿时间： | 2007-04-07 |
| 修稿时间： | 2007-04-07 |
Quick-adjusting Method of Interference Fringes and Flatness Calculation of Optical Flat Working Surface |
| |
| GONG Mei-wang,LIU Wen-jun.Quick-adjusting Method of Interference Fringes and Flatness Calculation of Optical Flat Working Surface[J].Industrial Measurement,2007,17(5):8-11. |
| |
| Authors: | GONG Mei-wang LIU Wen-jun |
| |
| Affiliation: | 1. Qingdao Institute of Measurement and Testing , Qingdao 266071, China; 2. Qingdao Water Conservancy Survey Design Institute Limited Company, Qingdao 266023, China |
| |
| Abstract: | Flatness of optical flat working surface was verified by use of plane equal-thickness interferometer. In verification, 3 to 5 interference fringes must be adjusted in measured area, then flatness of optical flat working surface was calcuylated based on measuring principle and foroula. Quick adjusting method of interference fringes and correct quotation method of standard optical flat flatness are analyzed. |
| |
| Keywords: | equal-thickness interference interference fringe adjusting method flatness calculation |
| 本文献已被 维普 万方数据 等数据库收录！ |
