Evaluation of Thermophysical Properties of Functionally Graded Materials

In this work, by considering four-layered functionally graded material (FGM) specimens of Cu/Ni and PSZ/NiCrAlY, the transient characteristics and homogeneity of heat conduction media have been studied. The thermal diffusivities of the considered specimens have been measured by the laser flash method. As the temperature response curve of a FGM is very similar to that of a homogeneous material, it is difficult to distinguish a FGM from a homogeneous material by the shape of the temperature responses. Therefore, the thermal diffusivity obtained from the half-time method is usually taken as the corresponding value of the thermal diffusivity. The apparent thermal conductivity, obtained from the corresponding value of the thermal diffusivity and the average of the heat capacity of each layer, is different from the effective thermal conductivity, obtained from the sum of the heat resistances of each layer. As the values of the heat capacity of materials exist over a certain range, and the heat capacity distribution can be predicted when the materials in a FGM are known, the amount of error that will be caused when the effective thermal conductivity is replaced by the apparent value can be determined. Also, the heterogeneity of a FGM, based on an evaluation of thermophysical properties, has been discussed.Paper presented at the Seventh Asian Thermophysical Properties Conference, August 23–28, 2004, Hefei and Huangshan, Anhui,P. R. China.