首页 | 本学科首页   官方微博 | 高级检索  
     

基于密度-敏度层次更新策略的三维连续体结构拓扑优化
引用本文:田启华,王进学,杜义贤,王涛. 基于密度-敏度层次更新策略的三维连续体结构拓扑优化[J]. 工程设计学报, 2015, 22(2): 155-160
作者姓名:田启华  王进学  杜义贤  王涛
作者单位:三峡大学 机械与动力学院,湖北 宜昌 443002
基金项目:国家自然科学基金资助项目(51475265,51105229);三峡大学2014年硕士学位论文培优基金资助项目(2014 PY025).
摘    要:针对三维连续体结构静力学拓扑优化中灰度单元过多的问题,以结构的柔度最小为目标函数,运用基于SIMP插值方法建立的静力学拓扑优化数学模型,提出一种密度-敏度层次更新策略.以数控插齿机床身为例,运用该更新策略,采用MATLAB编程进行三维拓扑优化.优化结果中灰度单元明显减少,说明了密度-敏度层次更新策略的合理性.

关 键 词:灰度单元  密度-敏度层次更新策略  数控插齿机床身  三维拓扑优化
收稿时间:2014-08-14;

Three-dimensional continuum topology optimization based on density-sensitivity level update policy
TIAN Qi-hua,WANG Jin-xue,DU Yi-xian,WANG Tao. Three-dimensional continuum topology optimization based on density-sensitivity level update policy[J]. Journal of Engineering Design, 2015, 22(2): 155-160
Authors:TIAN Qi-hua  WANG Jin-xue  DU Yi-xian  WANG Tao
Affiliation:College of Mechanical and Power Engineering, China Three Gorges University, Yichang 443002, China
Abstract:According to the problem of gray cells redundant during the three-dimensional continuum static topology optimization, a density-acuity level update strategy was proposed taking the minimum flexibility of the structure as the objective function and using the topology optimization mathematical model based on the SIMP interpolation method. Took NC gear shaping machine tool bed as an example, the update strategy was used and the algorithm with MATLAB was achieved to do the three|dimensional topology optimization. The gray cells decreased obviously in the optimization result, which illustrated the rationality of the density-acuity level update strategy.
Keywords:gray cell  density-acuity level update policy  NC gear shaping machine tool bed  three-dimensional topology optimization
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《工程设计学报》浏览原始摘要信息
点击此处可从《工程设计学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号