| T10-20G爆炸焊接复合板 |
| |
| 引用本文： | 史长根,王耀华,周春华,蔡立艮.T10-20G爆炸焊接复合板[J].爆破,2001,18(2):90-92. |
| |
| 作者姓名： | 史长根 王耀华 周春华 蔡立艮 |
| |
| 作者单位： | 解放军理工大学工程兵工程学院, |
| |
| 摘 要： | 通过选取最佳的爆炸焊接参数，消除了T10－20G爆炸复合板表面的裂纹，使复合率达到100％，微观测试和宏观力学性能检测表明，从起爆端开始，界面波依次为微波状和小波状，消除了大波状界面中不可避免的微观缺陷，界面的结合强度较高
|
| 关 键 词： | 爆炸焊接 界面波 结合强度 T10－20G 爆炸焊接复合 工具钢 |
| 文章编号： | 1001-487(2001)02-0090-03 |
| 修稿时间： | 2001年3月2日 |
T10-20G Explosive Welding Cladding Plate |
| |
| SHI Chang gen,WANG Yao hua,ZHOU Chun hua,CAI Li gen.T10-20G Explosive Welding Cladding Plate[J].Blasting,2001,18(2):90-92. |
| |
| Authors: | SHI Chang gen WANG Yao hua ZHOU Chun hua CAI Li gen |
| |
| Abstract: | The thin carcks in the surface of T10 20G cladding plate are eliminated, and the cladding rate reaches 100% by selecting the optimum parameters.The microcosmic and the mechanical property tests make it clear that the interfaces are micro and small wave successively from the initiation point, and the microcosmic flaws which might not be avoided in a large wavy interface are eliminated.The interface bonding strength is higher. |
| |
| Keywords: | explosive welding \ cladding plate \ interface wave \ bonding strength |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
