| 形变量和时效对Al-Cu-Li合金组织性能的影响 |
| |
| 引用本文： | 周昌荣,潘青林. 形变量和时效对Al-Cu-Li合金组织性能的影响[J]. 材料科学与工艺, 2008, 16(4): 585-588 |
| |
| 作者姓名： | 周昌荣 潘青林 |
| |
| 作者单位： | 桂林电子科技大学信息材料科学与工程系,广西桂林,541004;中南大学材料科学与工程学院,长沙,410083;中南大学材料科学与工程学院,长沙,410083 |
| |
| 基金项目： | 国家高技术研究发展计划(863计划) |
| |
| 摘 要： | 为了改善铝合金的力学性能,利用形变和时效工艺提高Al-3.5Cu-1.5Li-0.12Zr合金的强度和塑性.采用TEM观察和室温拉伸试验等手段,研究了形变量和时效工艺对含钪Al-3.5Cu-1.5Li-0.12Zr合金微观组织与拉伸性能的影响.结果表明,时效前的变形能促进T1(Al2CuLi)相弥散细小析出,显著提高合金强度,使时效峰值提前.合金强度随形变量和时效时间增加而增加,到峰值后,随形变量增加和时效时间的延长,T1相长大粗化,合金强度和塑性降低.该合金合宜的形变量和时效工艺为3.5%预变形和160℃/24 h时效.
|
| 关 键 词： | 形变时效 含钪铝合金 Al-Li合金 显微组织 |
Effects of deformation and aging on microstructure and tensile property of Al-Cu-Li alloy containing Sc |
| |
| ZHOU Chang-rong,PAN Qing-lin. Effects of deformation and aging on microstructure and tensile property of Al-Cu-Li alloy containing Sc[J]. Materials Science and Technology, 2008, 16(4): 585-588 |
| |
| Authors: | ZHOU Chang-rong PAN Qing-lin |
| |
| Affiliation: | 1.Dept.of Information Material and Engineering,Guilin University of Electronic Technology,Guilin 541001,China 2.School of Material Science and Engineering,Central South University,Changsha 410083,China) |
| |
| Abstract: | To improve the mechanical properties of aluminum alloy,the process of deformation and aging was employed to increase the strength and plasticity of Al-3.5Cu-1.5 Li-0.12 Zr alloy containing Sc.Effects of deformation and aging on its microstructure and tensile mechanical property were investigated by the observation of microstructures and tensile tests at room temperature.The results show that the deformation before aging can greatly improve tensile properties of the alloy and make the aging peak occur early,and the T1(Al2CuLi) precipitation distributes more dispersively and homegenously.The strength of the alloy is improved with the increasing predeformation and aging time.But over deformation leads to the coarsening of T1 phase and its bad distribution,which causes the mechanical property of the alloy decreased.The favorable process is 3.5% predeformation and 160 ℃/24 h aging under the experimental conditions. |
| |
| Keywords: | deformation-aging aluminum alloy containing Sc Al-Li alloy microstructure |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
