首页 | 本学科首页   官方微博 | 高级检索  
     

夹杂物对粉末高温合金疲劳性能的影响
引用本文:郭伟彬.夹杂物对粉末高温合金疲劳性能的影响[J].理化检验(物理分册),2008,44(5):231-234.
作者姓名:郭伟彬
作者单位:北京航空材料研究院,北京,100095
摘    要:粉末高温合金FGH95是发动机用的优选材料。通过对该合金的疲劳性能试验和扫描电镜微观观察,发现合金中含有由铝、氧、镁、钛、硅和钇等元素组成的夹杂物。无论室温或者高温条件下,合金的疲劳裂纹源均从夹杂物处萌生,并且夹杂物尺寸越大,距离表面越近,所对应的疲劳寿命越低。

关 键 词:粉末高温合金  夹杂物  疲劳寿命
文章编号:1001-4012(2008)05-0231-04
修稿时间:2007年8月11日

INCLUSION INFLUENCE ON FATIGUE PROPERTY OF P/M SUPERALLOY
GUO Wei-bin.INCLUSION INFLUENCE ON FATIGUE PROPERTY OF P/M SUPERALLOY[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2008,44(5):231-234.
Authors:GUO Wei-bin
Affiliation:GUO Wei-bin (Beijing Institute of Aeronautical Materials, Beijing 100095, China)
Abstract:Through the high cycle fatigue experiment, the fatigue behaviour curves on the room temperature and 650 ℃ were obtained. With the SEM analysis of the fracture section, the results showed that the inclusion involved Al, O, Mg, Ti, Si and Y. The cracks were initiated at the inclusions. And with the increase of the dimension of the inclusion, the fatigue life of the P/M alloys decreased.
Keywords:P/M Superalloy  Inclusion  Fatigue life
本文献已被 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号