| 螺栓断裂原因与抽检结果分析 |
| |
| 引用本文： | 温建萍,温涛,冯庆伟,卢鑫.螺栓断裂原因与抽检结果分析[J].理化检验(物理分册),2005,41(4):199-202. |
| |
| 作者姓名： | 温建萍 温涛 冯庆伟 卢鑫 |
| |
| 作者单位： | 1. 南京航空航天大学材料科学与技术学院,材料系,南京,210016
2. 胜利石油股份有限公司现河采油厂,东营,257068 |
| |
| 摘 要： | 采用断口宏观形貌观察、化学成分分析、显微组织检验、力学性能测试及腐蚀产物的X射线衍射分析等手段，对断裂与部分抽检的卡瓦螺栓进行了综合试验分析。结果表明，断裂螺栓为应力腐蚀断裂。而从抽检的螺栓中发现，有的化学成分不符合要求，有的热处理工艺不合理，有的存在表面淬火裂纹等，螺栓质量的不合格率约10％。在质量分析的基础上，提出相应的改进措施。
|
| 关 键 词： | 螺栓 应力腐蚀断裂 显微组织 热处理 淬火裂纹 |
| 文章编号： | 1001-4012(2005)04-0199-04 |
ANALYSIS OF FRACTURE REASON AND RANDOM SAMPLE INSPECTION OF BOLT |
| |
| WEN Jian-ping,WEN Tao,FENG Qing-wei,LU Xin.ANALYSIS OF FRACTURE REASON AND RANDOM SAMPLE INSPECTION OF BOLT[J].Physical Testing and Chemical Analysis Part A:Physical Testing,2005,41(4):199-202. |
| |
| Authors: | WEN Jian-ping WEN Tao FENG Qing-wei LU Xin |
| |
| Abstract: | In this paper, by means of macro morphology inspection, chemical composition analysis, microstructure examiation, mechanical property testing and X rays diffraction analysis, the fractured bolt and random sample bolt were analyzed. The sesults showed that the different bolt had different fracture reason as follows: the No.1 bolt was the stress corrosion fracture, the No.2 bolt was fractured due to its chemical composition did not meet its requirement, the No.3 bolt was improper in heat treatment process, and the No.4 bolt was existing the surface quenching crack. The unqualified percentage of bolt quality is about 10%. Based on the quality analysis, we proposed the relative improvment measures. |
| |
| Keywords: | Bolt Fracture of stress corrosion Microstructure Heat treatment Quenching crack |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
