首页 | 本学科首页   官方微博 | 高级检索  
     

电感器用Ni-Cu-Zn铁氧体薄膜的设计与性能研究
引用本文:范跃农,冯则坤,陈中艳,龚荣洲.电感器用Ni-Cu-Zn铁氧体薄膜的设计与性能研究[J].无机材料学报,2012,27(4):375-378.
作者姓名:范跃农  冯则坤  陈中艳  龚荣洲
作者单位:(1. 华中科技大学 电子科学与技术系, 武汉 430074; 2. 景德镇陶瓷学院 机电系, 景德镇 333403)
基金项目:高等学校博士学科点专项科研基金(20090142120003)~~
摘    要:采用丝网印刷技术制备Ni-Cu-Zn铁氧体电感器薄膜, 并对其性能进行了表征. XRD分析表明, 铁氧体薄膜具有相同的晶格结构. 研究结果表明, 在引入了铁氧体薄膜后, 电感器的电感量相对于空心电感器有30%左右的提高, 品质因数依频率不同有所改善, 共振频率有所降低. 经400℃后处理的薄膜电感器在低频时性能最好, 50 MHz时电感量提高了27%, 品质因数提高了39%.

关 键 词:铁氧体薄膜  电感量  品质因数  丝网印刷  
收稿时间:2011-07-08
修稿时间:2011-10-09

Design and Performance of Ni-Cu-Zn Ferrite Film for Inductor
FAN Yue-Nong,FENG Ze-Kun,CHEN Zhong-Yan,GONG Rong-Zhou.Design and Performance of Ni-Cu-Zn Ferrite Film for Inductor[J].Journal of Inorganic Materials,2012,27(4):375-378.
Authors:FAN Yue-Nong  FENG Ze-Kun  CHEN Zhong-Yan  GONG Rong-Zhou
Affiliation:(1. Department of Electronic Science and Technology, Huazhong University of Science and Technology, Wuhan 430074, China; 2. Department of Mechanical and Electrical, Jingdezhen Ceramic Institute, Jingdezhen 333403, China)
Abstract:Ni-Cu-Zn ferrite inductor film was fabricated by screen print technology,and its performances were in-vestigated.XRD results suggest that the as-prepared thin films exhibit the same crystalline structure.The results show that after introducing of ferrite film,the inductance increases by 30%,the quality factor is improved,and the resonance frequency decrease.Ferrite inductor thin films annealed at 400℃ exhibit an optimum performance with high quality at 50 MHz,inductance increased by 27%,the quality factor increased by 39%.
Keywords:ferrite film  inductance  quality factor  screen printing
本文献已被 CNKI 等数据库收录!
点击此处可从《无机材料学报》浏览原始摘要信息
点击此处可从《无机材料学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号