|
|||||
|
|
| 陶瓷材料的选区激光烧结快速成型技术研究进展 | |
| 引用本文： | 韩召,曹文斌,林志明,李江涛,冯涛.陶瓷材料的选区激光烧结快速成型技术研究进展[J].无机材料学报,2004,19(4):705-713. |
| 作者姓名： | 韩召 曹文斌 林志明 李江涛 冯涛 |
| 作者单位： | 1. 北京科技大学无机非金属材料系,北京,100083 2. 中国科学院理化技术研究所,北京,100101 3. 北京隆源自动成型系统有限公司,北京,100088 |
| 基金项目： | 国家自然科学基金(50172005) |
| 摘 要： | 阐述了陶瓷材料选区激光烧结技术的原理、工艺和特点，着重分析了粉体预处理、激光烧结参数以及坯体后处理等工艺因素对制件精度和性能的影响，还介绍了该技术目前的应用状况以及潜在的应用领域，最后对该项技术研究和发展的趋势作了展望，指出选区激光烧结技术有可能成为本世纪最主要的陶瓷材料成型工艺之一。 |
| 关 键 词： | 选区激光烧结 陶瓷 成型工艺 |
| 文章编号： | 1000-324X(2004)04-0705-09 |
Progress on Rapid Prototyping of Ceramic Parts by Selective Laser Sintering |
|
| HAN Zhao,CAO Wen-Bin,LIN Zhi-Ming,LI Jiang-Tao,FENG Tao.Progress on Rapid Prototyping of Ceramic Parts by Selective Laser Sintering[J].Journal of Inorganic Materials,2004,19(4):705-713. | |
| Authors: | HAN Zhao CAO Wen-Bin LIN Zhi-Ming LI Jiang-Tao FENG Tao |
| Abstract: | The principle, processing, and characteristics of selective.laser sintering (SLS) used for fabricating ceramic components were reviewed in the present paper. The influences of processing parameters, such as the pre-treatment of starting powders, the laser sintering parameters and the post-treatment, on the as-fabricated parts were analyzed. The potential application area of SLS technique was also discussed. It is demonstrated that selective laser sintering will become one of the most promising technique for ceramic consolidation in the 21th century. |
| Keywords: | selective laser sintering ceramic forming processes |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ | |