首页 | 本学科首页   官方微博 | 高级检索  
     

激光熔覆制备Fe3Al金属间化合物覆层的组织结构
引用本文:程广萍,何宜柱.激光熔覆制备Fe3Al金属间化合物覆层的组织结构[J].材料保护,2005,38(11):56-58.
作者姓名:程广萍  何宜柱
作者单位:安徽工业大学材料工程学院,安徽,马鞍山,243002
摘    要:为了研究激光熔覆工艺条件下Fe3Al金属间化合物合金层的组织结构特点,以纯Fe3Al粉 1%Y2O3为原料在钢基体表面激光熔覆Fe3Al金属间化合物,利用扫描电镜、能谱仪、X射线衍射试验方法等对熔覆合金层、合金层与钢基体的结合界面等进行了显微组织与相结构的分析.试验获得了致密、无肉眼可见气孔、夹杂的合金层,合金层与基体间完全冶金结合,但存在裂纹现象;熔覆合金层主要由单相Fe3Al构成,覆层组织为粗大等轴状晶团,等轴状晶团由大量极细小的条状Fe3Al晶粒构成,一些相邻的条状晶粒之间具有基本一致的晶体学取向.

关 键 词:激光熔覆  Fe3Al  金属间化合物  组织结构
文章编号:1001-1560(2005)11-0056-03
收稿时间:2005-06-07
修稿时间:2005-06-07

Structure of Laser Cladding Fe3Al Intermetallic Compound Coating
CHENG Guang-ping,HE Yi-zhu.Structure of Laser Cladding Fe3Al Intermetallic Compound Coating[J].Journal of Materials Protection,2005,38(11):56-58.
Authors:CHENG Guang-ping  HE Yi-zhu
Abstract:Fe_3Al intermetallic compound was prepared on the mild steel by laser cladding with Fe_3Al powder and 1% Y_2O_3 as materials to study the structure of intermmetallic compound coating.The microstructure and phase structure of the coating and the boundary between the coating and substrate were studied through SEM,EDX and X-ray diffraction analysis techniques.Dense alloy coating without pore and inclusion is obtained which metallurgically bonded with steel but existing a few cracks.The results show that the cladding alloy coating is mainly composed of single-phase Fe_3Al,and the microstructure is coarse equiaxed grain-groups that consist of large amount of fined slug like Fe_3Al grains,between which some adjacent grains have the similar orientation.
Keywords:laser cladding  Fe_3Al  intermetallic compound  structure
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号