| 45钢激光合金化后的组织结构及性能 |
| |
| 引用本文： | 童昊,胡树兵,石凯源,王璐.45钢激光合金化后的组织结构及性能[J].材料保护,2012,45(4):49-51,74. |
| |
| 作者姓名： | 童昊 胡树兵 石凯源 王璐 |
| |
| 作者单位： | 华中科技大学材料成型与模具技术国家重点实验室,湖北武汉,430074 |
| |
| 基金项目： | 2010年省部产学研合作重大项目(2010A090200047);国际热核聚变实验堆(ITER)计划专项(2010GB109000);华中科技大学材料成型与模具技术国家重点实验室自主课题 |
| |
| 摘 要： | 对45钢激光合金化处理可改善其组织结构及性能。研究了45钢不同工艺条件(功率、扫描速度)下激光处理后的组织结构、成分、显微硬度以及耐腐蚀性能。结果表明:45钢合金化后从表层到基体的区域分为合金化区、过渡区和热影响区,其中合金化区由树枝晶和胞状晶组成;合金化区的显微硬度相对于基体有明显提高,且随扫描速度以及功率的增大,合金化区的硬度增大;45钢合金化后耐腐蚀性能得到了较大的提升。
|
| 关 键 词： | 激光合金化 钢 组织结构 显微硬度 耐腐蚀性 |
Microstructure and Performance of 45 Steel after Laser Surface Alloying |
| |
| TONG Hao,HU Shu-bing,SHI Kai-yuan,WANG Lu.Microstructure and Performance of 45 Steel after Laser Surface Alloying[J].Journal of Materials Protection,2012,45(4):49-51,74. |
| |
| Authors: | TONG Hao HU Shu-bing SHI Kai-yuan WANG Lu |
| |
| Affiliation: | (State Key Laboratory of Materials Processing and Die & Mould Technology,Huazhong University of Science and Technology,Wuhan 430074,China) |
| |
| Abstract: | Laser surface alloying of 45 steel was conducted under different power and scanning rate.The microstructure and composition of the steel after laser surface alloying treatment were analyzed,and its microhardness and corrosion resistance were examined.It was found that,after laser surface alloying of the steel,alloying zone,transition zone and heat affected zone could be differentiated from the surface to the substrate,and the alloying zone consisted of dendrite and cell-like dendrite.In the meantime,the hardness of the steel specimen after laser surface alloying increased with increasing scanning rate and power,and the alloying zone had much higher hardness than the substrate.Besides,laser surface alloying also contributed to significantly improved corrosion resistance of 45 steel. |
| |
| Keywords: | laser surface alloying 45 steel microstructure hardness corrosion resistance |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
