| 聚丙烯塑料低温化学镀Ni-P工艺的研究 |
| |
| 引用本文： | 张拥乱,朱有兰,王伟旬.聚丙烯塑料低温化学镀Ni-P工艺的研究[J].材料保护,2004,37(3):36-37. |
| |
| 作者姓名： | 张拥乱 朱有兰 王伟旬 |
| |
| 作者单位： | 广东工业大学材料与能源学院,广东,广州,510643;广东工业大学材料与能源学院,广东,广州,510643;广东工业大学材料与能源学院,广东,广州,510643 |
| |
| 摘 要： | 研究了Ni-P化学镀液的主要成分、pH值和温度工艺参数对化学沉积Ni-P合金镀层镀速的影响.通过选择合适的镀液成分和工艺参数,在PP塑料基体上低温化学镀Ni-P合金工艺中获得中磷含量合金镀层,探讨了镀液组分对镀层性能的影响,优化了工艺参数.利用扫描电镜测得镀层的含磷量为8.057%,所以为非晶态的镀层.
|
| 关 键 词： | 化学镀 PP塑料 Ni-P合金 |
| 文章编号： | 1001-1560(2004)03-0036-02 |
Low Temperature Electroless Nickel- Phosphorus Plating Technology on Polypropylene Plastic |
| |
| ZHANG Yong-uan,ZHU You-lan,WANG Wei-xun.Low Temperature Electroless Nickel- Phosphorus Plating Technology on Polypropylene Plastic[J].Journal of Materials Protection,2004,37(3):36-37. |
| |
| Authors: | ZHANG Yong-uan ZHU You-lan WANG Wei-xun |
| |
| Affiliation: | ZHANG Yong-1uan,ZHU You-lan,WANG Wei-xun |
| |
| Abstract: | Effects of process parameters such as components and pH value of bath and time on the deposit rate of electroless nickel-phosphorus plating were studied.By choosing the proper components and process parameters,coating with medium phosphorus content was deposited on the substrate of polypropylene plasticthrough electroless nickel-phosphorus alloy plating under low temperature.The influences of components on the properties of plating were discussed and the operating parameters were also optimized.Nickel-phosphorus plating with phosphorus content more than 8.057wt%is amorphous by SEM. |
| |
| Keywords: | electroless plating polypropylene plastic nickelphosphorus alloy |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
