首页 | 本学科首页   官方微博 | 高级检索  
     

基于调制随机共振的微弱信号检测研究
引用本文:夏均忠,刘远宏,马宗坡,冷永刚,安相璧.基于调制随机共振的微弱信号检测研究[J].振动与冲击,2012,31(3):132-135,140.
作者姓名:夏均忠  刘远宏  马宗坡  冷永刚  安相璧
作者单位:1.军事交通学院 汽车工程系,天津 300161; 2.天津大学 机械工程学院,天津 300072
基金项目:国家自然科学基金资助项目
摘    要:在工程信号处理过程中信号常超出随机共振绝热近似或线性响应理论的小参数要求而成为大参数信号。论文深入探讨非线性双稳系统随机共振发生机理和条件要求,将频率调制技术与随机共振理论相结合,提出用调制随机共振的方法实现随机共振理论在工程信号检测中的应用,进行了数值仿真分析证明其有效性,并将该方法应用于轴承内圈点蚀故障的检测

关 键 词:微弱信号检测    随机共振    双稳系统    频率调制  
收稿时间:2010-11-10
修稿时间:2011-7-20

Weak signal detection based on the modulated stochastic resonance
XIA Jun-zhong , LIU Yuan-hong , MA Zong-po , LENG Yong-gang , AN Xiang-bi.Weak signal detection based on the modulated stochastic resonance[J].Journal of Vibration and Shock,2012,31(3):132-135,140.
Authors:XIA Jun-zhong  LIU Yuan-hong  MA Zong-po  LENG Yong-gang  AN Xiang-bi
Affiliation:1. Automotive Engineering Department, Academy of Military Transportation, Tianjin 300161, china; 2. School of Mechanical Engineering, Tianjin University, Tianjin 300072, China
Abstract:In engineering signal processing,parameters of the signal are often beyond the requirements of being small parameters in adiabatic approximation approach or linear response theory of stochastic resonance.In the paper,the mechanism and condition requirements of stochastic resonance of nonlinear bistable system were discussed.By combining the frequency modulation technique with the theory of stochastic resonance,a method based on modulated stochastic resonance was suggested to achieve weak signal detection in engineering applications.Numerical simulations prove its effectiveness.The method has been successfully used to detect the fault of pitting corrosion on bearing inner race.
Keywords:weak signal detection  stochastic resonance  bistable system  frequency modulation
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《振动与冲击》浏览原始摘要信息
点击此处可从《振动与冲击》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号