首页 | 本学科首页   官方微博 | 高级检索  
     

超声衰减增益补偿电路的设计
引用本文:孙颖,李醒飞,张国雄.超声衰减增益补偿电路的设计[J].声学技术,2003,22(4):243-245.
作者姓名:孙颖  李醒飞  张国雄
作者单位:天津大学精密测试技术与仪器国家重点试验室,天津,300072
摘    要:医用超声仪器发出的超声波在人体内的传播过程中,能量被人体组织吸收,随着探测深度的增加,超声波能量逐渐衰减,回波信号的动态范围很大,因此要进行声程补偿。文章简要介绍了超声诊断仪器的深度时间增益补偿电路(TGC)的基本原理,即用一定的电压曲线来控制放大器的增益,使不同深度下的超声回波获得不同的放大倍数。文中还提出了一种采用新型电子元器件的数字控制解决方案,能有效减小送入A/D转换器的信号的动态范围。该方案采用新型的高精度、低噪声、增益可变放大器AD604,电路简单,控制信号稳定可靠,能准确地补偿超声波在人体内的衰减,并为控制系统实现高速数字化提供了一个方法。

关 键 词:医用超声仪器  超声衰减增益  补偿电路设计  深度时间增益补偿电路  TGC  吸收系数  增益可变放大器
文章编号:1000-3630(2003)04-0243-03
修稿时间:2002年9月28日

Design of time gain compensation circuit for ultrasonic signals
SUN Ying,LI Xing-fei,ZHANG Guo-xiongTianjin University,Tianjin ,China.Design of time gain compensation circuit for ultrasonic signals[J].Technical Acoustics,2003,22(4):243-245.
Authors:SUN Ying  LI Xing-fei  ZHANG Guo-xiongTianjin University  Tianjin  China
Affiliation:SUN Ying,LI Xing-fei,ZHANG Guo-xiongTianjin University,Tianjin 300072,China)
Abstract:Ultrasonic energy is absorbed by the penetrated medium and is attenuated with depth. Therefore, it needs compensation so as to limit the dynamic range of the signal sent to the A/D converter. Basic principles of the medical ultrasonic diagnostic instruments and the time gain compensation circuit are briefly introduced, and a new design of TGC circuits using new electronic components is proposed in this paper. AD604 is an ultra-low noise, very accurate, and linear-in-dB variable gain amplifier optimized for time-based variable gain control in ultrasound applications. The described design method is simple and its digital control is stable.
Keywords:ultrasonic diagnostic device  attenuation time gain compensation  AD604
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号