首页 | 本学科首页   官方微博 | 高级检索  
     

基于VPX标准的RapidIO交换和Flash存储模块设计
引用本文:李宾,马晓川,鄢社锋,杨力.基于VPX标准的RapidIO交换和Flash存储模块设计[J].声学技术,2011(6):528-532.
作者姓名:李宾  马晓川  鄢社锋  杨力
作者单位:中国科学院声学研究所,北京100190
基金项目:国家自然科学基金项目(11074270)
摘    要:针对某阵列信号处理系统中的互连总线和数据存储问题,提出了基于VPX标准的RapidIO交换和Flash存储模块的设计方案,并完成了该模块的软硬件设计.介绍了新一代高速串行总线RapidIO和VPX标准,根据VPX标准设计板卡,利用Tsi578交换机设计RapidIO网络实现多DSP系统的并行处理结构.研究了RapidI...

关 键 词:VPX  RapidIO  互连总线
收稿时间:2011/1/20 0:00:00
修稿时间:2011/3/20 0:00:00

Design of RapidIO switch and flash storage module based on VPX standard
LI Bin,MA Xiao-chuan,YAN She-feng and YANG Li.Design of RapidIO switch and flash storage module based on VPX standard[J].Technical Acoustics,2011(6):528-532.
Authors:LI Bin  MA Xiao-chuan  YAN She-feng and YANG Li
Affiliation:(Institute of Acoustics,Chinese Academy of Sciences,Beijing 100190,China)
Abstract:A design of RapidIO switch and Flash storage module is proposed aiming at the interconnect bus and data storage problem met in an array signal processing system.The hardware and software design of the module are real-ized.Firstly,the serial RapidIO bus and VPX standard are introduced.The module is designed according to VPX standard.Tsi578 switch is used in RapidIO network to realize the multi-DSP parallel processing system.RapidIO data transfer operation and RapidIO boot mode of the TMS320C6455 DSP are both studied.The software design flow is presented then.NAND Flash is used to realize data storage capability.Finally,the module performance is listed and the data trans-fer speed is tested in the actual signal processing system.The data transfer speed is up to 600MB/s.Experiments show that this design is advanced,realizable and stable,which can be used as a reference design of interconnect bus and data storage.
Keywords:VPX  RapidIO  interconnect bus
本文献已被 维普 等数据库收录!
点击此处可从《声学技术》浏览原始摘要信息
点击此处可从《声学技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号