| 泡沫铝合金渗流铸造工艺的试验分析EI |
| |
| 引用本文： | 杨思一.泡沫铝合金渗流铸造工艺的试验分析EI[J].材料工程,1997(9):41-46,44. |
| |
| 作者姓名： | 杨思一 |
| |
| 作者单位： | 山东工程学院 |
| |
| 摘 要： | 采用正交实验方法 ,选择三种不同粒径的填料 ,系统研究了粒子预热温度、金属液浇注温度和充型压力对渗流铸造泡沫铝合金成型工艺的影响 ,并对试验结果作了理论分析。认为 ,合理选择粒子预热温度是生产泡沫金属铸件的前提 ,适当提高浇注温度是保证泡沫组织均匀良好的关键 ,保持适度的充型压力有利于提高材质通孔率和工艺稳定性。
|
| 关 键 词： | 泡沫合金 渗流铸造 铝合金 铸造工艺 foam Al- alloys penetrating casting granules |
Experimental Analysis of Penetrating Casting of Foam Al- alloys around Granules |
| |
| Yang Siyi.Experimental Analysis of Penetrating Casting of Foam Al- alloys around Granules[J].Journal of Materials Engineering,1997(9):41-46,44. |
| |
| Authors: | Yang Siyi |
| |
| Affiliation: | Shandong Engineering Institute |
| |
| Abstract: | The effects of preheating temperature of granules,pouring temperature of melt and forming pressure on the forming process of penetrating casting of foam Al- alloys around granules were systematically studied using orthogonal experiment method and choosing three kinds of the granules size and the experimental results were theoretically analysed.It is consid- ered that the reasonable selection of granules preheating temperature is a prerequisite to produce the foam metal castings,proper increase of pouring temperature is a key to achieve the homoge- neous foam construction and the moderate forming pressure can increase the product porosity and technological stability. |
| |
| Keywords: | foam Al- alloys penetrating casting granules |
| 本文献已被 CNKI 维普 等数据库收录！ |
