首页 | 本学科首页   官方微博 | 高级检索  
     

锰锌铁氧体的低温合成及表征
引用本文:赵海涛,王俏,刘瑞萍,马瑞廷.锰锌铁氧体的低温合成及表征[J].材料工程,2016(11):73-77.
作者姓名:赵海涛  王俏  刘瑞萍  马瑞廷
作者单位:沈阳理工大学材料科学与工程学院,沈阳,110159
基金项目:国家自然科学基金(51303108);辽宁省高等学校优秀人才支持计划项目(LJQ2014025);沈阳市科技局应用基础研究计划项目(F14-231-1-33);沈阳理工大学材料加工工程重点学科开放基金项目(4771004kfx11)
摘    要:采用溶胶-凝胶自燃烧法在低温下一步合成了纯相尖晶石结构的锰锌铁氧体(Mn0.5Zn0.5Fe2O4)纳米颗粒。其结构、形貌和热分解过程分别采用X射线衍射仪(XRD)、扫描电镜(SEM)和TG-DSC分析仪进行了表征。结果表明:在pH=7.0、柠檬酸与金属离子摩尔比为1∶1和柠檬酸的浓度为0.7mol/L的条件下,金属的硝酸盐和柠檬酸形成的干凝胶可通过自燃烧过程一步合成出平均粒径约为60nm的纯相Mn0.5Zn0.5Fe2O4铁氧体纳米颗粒。经过400℃煅烧后,颗粒粒径增大,衍射峰变窄,强度增加,晶型更趋于完整。

关 键 词:锰锌铁氧体  溶胶-凝胶  自燃烧  纳米颗粒

Synthesis and Characterization of M nZn Ferrite at Low Temperature
ZHAO Hai-tao,WANG Qiao,LIU Rui-ping,MA Rui-ting.Synthesis and Characterization of M nZn Ferrite at Low Temperature[J].Journal of Materials Engineering,2016(11):73-77.
Authors:ZHAO Hai-tao  WANG Qiao  LIU Rui-ping  MA Rui-ting
Abstract:Pure phase spinel ferrite nanoparticles (Mn0.5Zn0.5Fe2O4) were one‐step synthesized by the sol‐gel auto‐combustion method at low temperature .The structural characteristics ,morphology and thermal decomposition were characterized by X‐ray Diffraction (XRD) ,Scanning Electron Microscope (SEM) ,TG‐DSC analyzer ,respectively .The results indicate that pure phase Mn0.5Zn0.5Fe2O4 ferrite nanoparticles of about 60nm in diameter can be directly synthesized after auto‐combustion of the ni‐trate‐citrate xerogel under the conditions of pH =7 .0 ,R= 1∶1 and C(CA)=0 .7 mol/L .The ob‐tained nanoparticles show the diameter increases and the diffraction peak narrows but the strength in‐creases after calcined at 400℃ which improves the crystal structure .
Keywords:M nZn ferrites  sol-gel  auto-combustion  nanoparticle
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号