| 配对材料对Al-10Si/SiC_p复合材料滑动磨擦性能的影响 |
| |
| 引用本文： | 吴洁君,王殿斌,桂满昌,袁广江.配对材料对Al-10Si/SiC_p复合材料滑动磨擦性能的影响[J].材料工程,1998(9). |
| |
| 作者姓名： | 吴洁君 王殿斌 桂满昌 袁广江 |
| |
| 作者单位： | 北京航空材料研究院 |
| |
| 摘 要： | 通过对Ａｌ－１０Ｓｉ／ＳｉＣｐ－４０Ｃｒ、Ａｌ－１０Ｓｉ／ＳｉＣｐ－Ｈ６２、Ａｌ－１０Ｓｉ／ＳｉＣｐ—Ａｌ－１０Ｓｉ／ＳｉＣｐ三对摩擦副的研究，发现配对材料对复合材料的抗磨损性能影响很大。结果表明，在试验条件下４０Ｃｒ钢适合与该铝基复合材料配对使用，而黄铜和该材料配对使用，则会大大降低复合材料耐磨损性能。另外，在较低载荷条件下，Ａｌ－１０Ｓｉ／ＳｉＣｐ自配对磨损率很低，亦能自配对使用。
|
| 关 键 词： | 复合材料 摩擦副 磨损率 颗粒增强 |
Effect of Different Counterface Materials on Siliding Wear Properties of Al 10Si/SiC p Composite |
| |
| Wu Jiejun,Wang Dianbin,Gui Manchang,Yuan,Guangjiang.Effect of Different Counterface Materials on Siliding Wear Properties of Al 10Si/SiC p Composite[J].Journal of Materials Engineering,1998(9). |
| |
| Authors: | Wu Jiejun Wang Dianbin Gui Manchang Yuan Guangjiang |
| |
| Abstract: | A study has been made of the wear characteristics of three counterfaces as Al 10Si/SiC p couple with different materials,such as 40Cr steel,H62 brass and Al 10Si/SiC p.It is found that these counterfaces exhibit much different wear rates.40Cr steel is a better counterface for the composite,and the wear rate is very high for the H62 brass matched with Al 10Si/SiC p.Under specific conditions,this composite performs a good self friction resistance.It can use itself as counterface. |
| |
| Keywords: | composite counterface wear rate particle reinforced |
| 本文献已被 CNKI 等数据库收录！ |
