首页 | 本学科首页   官方微博 | 高级检索  
     

固溶温度对Ti-5Mo-5V-2Cr-3Al钛合金棒材组织和性能的影响规律
引用本文:罗峥,魏衍广,陶海明,崔雪飞,陈海珊.固溶温度对Ti-5Mo-5V-2Cr-3Al钛合金棒材组织和性能的影响规律[J].材料导报,2014,28(14):117-120.
作者姓名:罗峥  魏衍广  陶海明  崔雪飞  陈海珊
作者单位:北京有色金属研究总院粉末冶金及特种材料研究所,北京 100088;北京有色金属研究总院粉末冶金及特种材料研究所,北京 100088;北京有色金属研究总院粉末冶金及特种材料研究所,北京 100088;北京有色金属研究总院粉末冶金及特种材料研究所,北京 100088;北京有色金属研究总院粉末冶金及特种材料研究所,北京 100088
基金项目:中国博士后科学基金(20080440334)
摘    要:研究了固溶温度对Ti-5Mo-5V-2Cr-3Al钛合金棒材显微组织和力学性能的影响。结果表明,钛合金固溶处理温度在相变点以下,空冷后,显微组织由β相、初生α相以及次生α相组成。随着固溶温度的升高,显微组织中β相晶粒尺寸增大,晶界α相厚度减小,产生有序化现象,而次生α相数量和尺寸减小,使合金的强度降低,塑性升高,但固溶处理温度为800℃时,网状晶界α相使塑性迅速下降;当固溶处理温度在相变点以上,Ti-5Mo-5V-2Cr-3Al钛合金重新形核并长大,随着固溶温度的升高,β相晶粒尺寸增大,初生α相数量减少,强度和塑性都下降,过冷β相晶粒发生应力诱发马氏体现象。

关 键 词:Ti-5Mo-5V-2Cr-3Al钛合金  固溶温度  力学性能  显微组织

Effect of Solution Temperature on the Microstructure and Properties of Ti-5Mo-5V-2Cr-3Al Titanium Alloy Bars
LUO Zheng,WEI Yanguang,TAO Haiming,CUI Xuefei and CHEN Haishan.Effect of Solution Temperature on the Microstructure and Properties of Ti-5Mo-5V-2Cr-3Al Titanium Alloy Bars[J].Materials Review,2014,28(14):117-120.
Authors:LUO Zheng  WEI Yanguang  TAO Haiming  CUI Xuefei and CHEN Haishan
Affiliation:Powder Metallurgy and Special Materials Research Department, Beijing General Research Institute for Non-ferrous Metals, Beijing 100088;Powder Metallurgy and Special Materials Research Department, Beijing General Research Institute for Non-ferrous Metals, Beijing 100088;Powder Metallurgy and Special Materials Research Department, Beijing General Research Institute for Non-ferrous Metals, Beijing 100088;Powder Metallurgy and Special Materials Research Department, Beijing General Research Institute for Non-ferrous Metals, Beijing 100088;Powder Metallurgy and Special Materials Research Department, Beijing General Research Institute for Non-ferrous Metals, Beijing 100088
Abstract:
Keywords:Ti-5Mo-5V-2Cr-3Al titanium alloy  solution temperature  mechanical property  microstructure
本文献已被 CNKI 等数据库收录!
点击此处可从《材料导报》浏览原始摘要信息
点击此处可从《材料导报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号