| 不同改性方式对发泡剂在铝熔体中分散性的影响 |
| |
| 引用本文： | 霍登伟,张太康,周向阳,李劼,刘宏专.不同改性方式对发泡剂在铝熔体中分散性的影响[J].材料导报,2011,25(4):100-103. |
| |
| 作者姓名： | 霍登伟 张太康 周向阳 李劼 刘宏专 |
| |
| 作者单位： | 中南大学冶金科学与工程学院,长沙,410083 |
| |
| 基金项目： | 国家自然基金资助项目(51074185); 中南大学2009年“大学生创新创业启航行动”; 2010年大学生创新实验计划(LE10257) |
| |
| 摘 要： | 采用新型发泡剂制备了泡沫铝,研究了包覆改性和混合改性两种改性方式对新型发泡剂在铝熔体中分散性的影响。结果表明,采用Al溶胶和Si溶胶对新型发泡剂进行包覆改性处理,发泡剂分散性差,所制备的泡沫铝存在较多大孔和裂纹;采用TiB2粉末和AlSi合金粉末混合改性处理新型发泡剂时,发泡剂分散性良好,并且随着TiB2和AlSi含量的增加得到的泡沫铝样品裂纹明显减少、泡体趋于均匀,但孔隙率逐渐降低。相比较而言,合金粉末混合改性法比溶胶包覆改性法使发泡剂的分散更均匀,制备的泡沫铝裂纹较少,且泡体结构较均匀。
|
| 关 键 词： | 泡沫铝 新型发泡剂 改性方式 分散性 |
Effects of Different Modifications on Dispersibility of Novel Foaming Agent in Aluminum Melt |
| |
| HUO Dengwei,ZHANG Taikang,ZHOU Xiangyang,LI Jie,LIU Hongzhuan.Effects of Different Modifications on Dispersibility of Novel Foaming Agent in Aluminum Melt[J].Materials Review,2011,25(4):100-103. |
| |
| Authors: | HUO Dengwei ZHANG Taikang ZHOU Xiangyang LI Jie LIU Hongzhuan |
| |
| Affiliation: | HUO Dengwei,ZHANG Taikang,ZHOU Xiangyang,LI Jie,LIU Hongzhuan (School of Metallurgical Science and Engineering,Central South University,Changsha 410083) |
| |
| Abstract: | Foam aluminum was prepared by novel foaming agent.Effects of coating modification and mixing modification on the dispersibility of novel foaming agent in aluminum melt were studied.Experimental results show that when the novel foaming agent is modified by coating alumina sol or silica sol,the poor dispersibility of foaming agent leads to more large holes and cracks of aluminum foams;when the novel foaming agent is modified by mixing with TiB2 or AlSi,the dispersibility of foaming agent is preferable,and cra... |
| |
| Keywords: | aluminum foam novel foaming agent modification methods dispersibility |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
