| 退火温度对多孔阳极氧化铝膜形貌的影响 |
| |
| 引用本文： | 赵世华,贾廷见,崔玉亭,朱治广,赵青,王文凯,王连伟,蔡娜.退火温度对多孔阳极氧化铝膜形貌的影响[J].材料导报,2011,25(20):102-104,108. |
| |
| 作者姓名： | 赵世华 贾廷见 崔玉亭 朱治广 赵青 王文凯 王连伟 蔡娜 |
| |
| 作者单位： | 商丘师范学院物理与电气信息学院,商丘,476000 |
| |
| 基金项目： | 商丘师范学院2011年度青年科研基金(2011QN14)商丘师范学院大学生创新性实验计划项目(2010-DXS-20);国家自然科学基金(11074160);河南省教育厅自然科学研究计划项目(2011A140020) |
| |
| 摘 要： | 采用二次阳极氧化法制备了有序的氧化铝膜,于800℃、900℃和1000℃对氧化铝膜进行退火处理,经X射线衍射检测发现,其晶相结构由γ-Al2O3向θ-Al2O3结构转变,而且由于相变不彻底导致多晶相结构并存。比较了3种不同的退火温度对氧化铝膜表面有序孔的影响,提出了对于内嵌入氧化铝膜的前驱体材料的退火条件,即退火温度不宜太高,退火时间不宜太长。
|
| 关 键 词： | 无机非金属材料 多孔氧化铝膜 阳极氧化 退火温度 相变 |
The Influence of Annealing Temperature on Morphology of Porous Anodic Alumina Membrane |
| |
| ZHAO Shihua,JIA Tingjian,CUI Yuting,ZHU Zhiguang,ZHAO Qing,WANG Wenkai,WANG Lianwei,CAI Na.The Influence of Annealing Temperature on Morphology of Porous Anodic Alumina Membrane[J].Materials Review,2011,25(20):102-104,108. |
| |
| Authors: | ZHAO Shihua JIA Tingjian CUI Yuting ZHU Zhiguang ZHAO Qing WANG Wenkai WANG Lianwei CAI Na |
| |
| Affiliation: | (Department of Physics and Information Engineering,Shangqiu Normal University,Shangqiu 476000) |
| |
| Abstract: | The ordered alumina membrane was prepared by the second anodic oxidation method,which was annealed at different temperature of 800℃,900℃ and 1000℃,respectively.The as-prepared alumina membrane was detected by X-ray diffraction(XRD) measurement.The results show that the crystal phase structures transform from γ-Al2O3 to θ-Al2O3 and the phenomenon of multi-crystal phase coexists,which all resulted from the incomplete phase transition.Compared with the influence of three different annealing temperatures on the ordered pores of the alumina membrane surface,the annealing condition of the precursor materials embedded in alumina membrane was proposed.That is,the annealing temperature and time should not be too high and long,respectively. |
| |
| Keywords: | inorganic non-metallic materials porous alumina membrane anodic oxidation annealing temperature phase transition |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
