首页 | 本学科首页   官方微博 | 高级检索  
     

Ni—P—Si3N4纳米粒子化学复合镀工艺优化及镀层性能表征
引用本文:王正平,孙松林,等.Ni—P—Si3N4纳米粒子化学复合镀工艺优化及镀层性能表征[J].中国表面工程,2001,14(3):24-29.
作者姓名:王正平  孙松林
作者单位:1. 哈尔滨工程大学
2. 装甲兵技术学院
3. 哈尔滨工业大学
4. 清华大学
基金项目:国家杰出青年科学基金(19725209)黑龙江省自然科学基金(99-8812)
摘    要:论述了化学复合镀的机理及用正交试验方法确定Ni-P-Si3N4纳米粒子化学复合镀工艺过程,并着重对镀层热处理后镀层的硬度进行了研究。测试表明:镀层硬度高,强度大,耐磨性好。

关 键 词:纳米粒子  化学复合镀  正交试验  镀层硬度
文章编号:1007-9289(2001)03-0024-06
修稿时间:2001年5月9日

The Optimization of Ni-P Electroless Composite Plating with Si3N4 Nano-particles and the Characterization of the Coating Properties
Wang Zhengping Sun Songlin Cao Maosheng Zhu Jing Yang Huijing,Chen Yujin Wang Biao.The Optimization of Ni-P Electroless Composite Plating with Si3N4 Nano-particles and the Characterization of the Coating Properties[J].China Surface Engineering,2001,14(3):24-29.
Authors:Wang Zhengping Sun Songlin Cao Maosheng Zhu Jing Yang Huijing  Chen Yujin Wang Biao
Affiliation:Wang Zhengping Sun Songlin Cao Maosheng Zhu Jing Yang Huijing Chen Yujin Wang Biao
Abstract:This paper described the basic principle of electroless composite plating, the optimization of the Ni-P composite plating with Si3N4 nano-particles by the orthogonal dosign, and the studies of coating hardness after heat treatment. It was indicated that the higher the mirco- hardness and strength, the better the wear-resistance of coating became.
Keywords:Nano-particle  Electroless Composite Plating  Orthogonal Method  Hardness of the coating
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《中国表面工程》浏览原始摘要信息
点击此处可从《中国表面工程》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号