| 排气阀壳体铸造工艺的数值模拟优化 |
| |
| 引用本文： | 李宝治,杨军,艾秀兰.排气阀壳体铸造工艺的数值模拟优化[J].现代铸铁,2011,31(3):89-94. |
| |
| 作者姓名： | 李宝治 杨军 艾秀兰 |
| |
| 作者单位： | 1. 沈阳铸造研究所,辽宁沈阳,110021
2. 大连交通大学材料科学与工程学院,辽宁大连,116028 |
| |
| 摘 要： | 为消除排气阀壳体的渗漏缺陷,利用ZCAST数值模拟软件对原铸造工艺方案进行模拟,发现产生渗漏的区域属于后凝固的区域。对封闭式和开放式两种新设计浇注系统模拟后,发现开放式浇注系统充型平稳、液面上升稳定,解决了铸件打压渗漏问题,通过采用铬矿砂砂芯解决了局部出现夹砂的问题。
|
| 关 键 词： | 数值模拟 排气阀壳体 铸造工艺 |
Casting Method Optimizing of Exhaust Valve Housing with Numeral Simulation |
| |
| LI Bao-zhi,YANG Jun,AI Xiu-lan.Casting Method Optimizing of Exhaust Valve Housing with Numeral Simulation[J].Modern Cast Iron,2011,31(3):89-94. |
| |
| Authors: | LI Bao-zhi YANG Jun AI Xiu-lan |
| |
| Affiliation: | LI Bao-zhi1,YANG Jun2,AI Xiu-lan2(1.Shenyang Research Institute of Foundry,Shenyang 110021,China,2.School of Material Science and Engineering,Dalian Jiaotong University,Dalian 116028,China) |
| |
| Abstract: | In order to eliminate the leakage defect of the exhaust valve housing,the original casting method was simulated using ZCAST simulation software and it was revealed that the leakage occurred in the latterly solidifying area.It was found after simulating redesigned both the pressured and non-pressured gating systems,that when using the non-pressured system,the mould filling was smooth and the iron melt level was raising stably,and therefore the leakage problem occurring in hydraulic test was solved.The local ... |
| |
| Keywords: | numeral simulation exhaust valve housing casting method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
