| 高速立式加工中心滑座的设计与拓扑优化 |
| |
| 引用本文： | 夏田,马晓钢,张功学. 高速立式加工中心滑座的设计与拓扑优化[J]. 机床与液压, 2011, 39(3). DOI: 10.3969/j.issn.1001-3881.2011.03.031 |
| |
| 作者姓名： | 夏田 马晓钢 张功学 |
| |
| 作者单位： | 陕西科技大学机电工程学院,陕西西安,710021 |
| |
| 基金项目： | 高档数控机床与基础制造装备科技重大专项(2009ZX04001-014-02) |
| |
| 摘 要： | 使用SolidWorks对滑座的4种方案进行三维建模,采用ANSYS Workbench对各滑座模型进行静刚度分析,确定较优的滑座模型,并运用ANSYS DesignXplorer对其进行优化设计,保证了滑座的静刚度要求,减少了滑座约10%的质量,提高了相关移动部件的运动性能。
|
| 关 键 词： | 滑座 静态刚度 拓扑优化 |
Design and Topological Optimization of the Slide of High Speed Vertical Machining Center |
| |
| XIA Tian,MA Xiaogang,ZHANG Gongxue. Design and Topological Optimization of the Slide of High Speed Vertical Machining Center[J]. Machine Tool & Hydraulics, 2011, 39(3). DOI: 10.3969/j.issn.1001-3881.2011.03.031 |
| |
| Authors: | XIA Tian MA Xiaogang ZHANG Gongxue |
| |
| Affiliation: | XIA Tian,MA Xiaogang,ZHANG Gongxue(School of Mechatronics Engineering,Shaanxi University of Science & Technology,Xi'an Shaanxi 710021,China) |
| |
| Abstract: | Four 3D models of the slide of high-speed vertical machining center were created in SolidWorks.They were transferred into ANSYS Workbench to analyze the static stiffness.The model which had the best static stiffness was optimized in ANSYS DesignXplorer.Compared with the original design,10% of the weight of the optimized structure is reduced and the static stiffness of it is as same as original design.The motion performances of relevant moving parts are improved. |
| |
| Keywords: | Slide Static stiffness Topological optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
