首页 | 本学科首页   官方微博 | 高级检索  
     

三轴卧式加工中心主轴静刚度仿真与试验研究
引用本文:仇健,刘志强,刘启伟,马晓波,林剑锋.三轴卧式加工中心主轴静刚度仿真与试验研究[J].机床与液压,2012,40(15):14-17.
作者姓名:仇健  刘志强  刘启伟  马晓波  林剑锋
作者单位:沈阳机床(集团)有限责任公司设计研究院,辽宁沈阳,110142
基金项目:国家科技重大专项(2010ZX04016-011,2010ZX04015-011)
摘    要:对卧式加工中心主轴系统静刚度进行了仿真和试验研究.研究发现:经有限元方法计算获得的结果与试验有较好的对应性;主轴静刚度在卸载时要大于加载时,卸载时主轴系统弹性恢复迟滞,并且加载曲线与卸载曲线不封闭,卸载时主轴变形恢复不到起点,进而影响加工精度.因此,提高系统刚度十分必要,可通过合理设计机床主轴结构、减小主轴悬伸量、提高传动部件单位质量刚度等方法提高切削系统刚度.

关 键 词:静刚度  主轴系统  卧式加工中心

Simulative and Experimental Study on Spindle Static Stiffness of 3 Axis Horizontal Machining Center
QIU Jian , LIU Zhiqiang , LIU Qiwei , MA Xiaobo , LIN Jianfeng.Simulative and Experimental Study on Spindle Static Stiffness of 3 Axis Horizontal Machining Center[J].Machine Tool & Hydraulics,2012,40(15):14-17.
Authors:QIU Jian  LIU Zhiqiang  LIU Qiwei  MA Xiaobo  LIN Jianfeng
Affiliation:(Design and Research Institute,Shenyang Machine Tool(Group) Co.,Ltd., Shenyang Liaoning 110142,China)
Abstract:Focusing on one type of horizontal machining center,finite element method and experimental study were carried on.It is found static stiffness calculated by FEM is identical with experimental data.Spindle static stiffness unloading is more than that of loading.The elastic deformation of spindle system resumes stagnantly when unloading.So the loading curve and unloading curve are not closed.The elastic deformation of spindle system can’t recover to origin which has bad effect on machining accuracy.Therefore,it is necessary to enhance static stiffness of spindle system.There are some methods to increase stiffness of cutting system such as optimizing the structure of spindle system,abating the elongation of spindle and increasing the stiffness per mass of transmission unit.
Keywords:Static stiffness  Spindle system  Horizontal machining center
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号