| 隧道维修钢板安装机械臂设计与分析 |
| |
| 引用本文： | 李瑞怡,杨宏斌,李静,徐爱军. 隧道维修钢板安装机械臂设计与分析[J]. 机床与液压, 2021, 49(2): 55-59 |
| |
| 作者姓名： | 李瑞怡 杨宏斌 李静 徐爱军 |
| |
| 作者单位： | 河南科技大学机电工程学院,河南洛阳471003;河南科技大学机电工程学院,河南洛阳471003;河南科技大学机电工程学院,河南洛阳471003;河南科技大学机电工程学院,河南洛阳471003 |
| |
| 基金项目： | 国家自然科学基金面上项目（51575161） |
| |
| 摘 要： | 针对隧道维修钢板安装的现状,设计一款七自由度的隧道维修钢板安装机械臂.利用SolidWorks软件对机械臂进行三维实体建模,为确保机械臂设计的合理性,运用SolidWorks与ANSYS Workbench相结合的方法对运动范围内极限工况下的机械臂进行静态和模态分析,得到应力应变云图和固有频率及其振型图.结果表明:机械...
|
| 关 键 词： | 机械臂 结构设计 三维建模 静态分析 模态分析 |
Design and Analysis of Steel Plate Installation Manipulator for Tunnel Maintenance |
| |
| Abstract: | Aimed at the current situation of steel plate installation in tunnel maintenance,a 7-DOF steel plate installation manipulator was designed.SolidWorks software was used to carry out 3D solid modeling for the manipulator.In order to ensure the rationality of the design of the manipulator,the manipulator was analyzed under limit conditions in the motion range.The static and modal state of the manipulator were analyzed by using SolidWorks and ANSYS Workbench,and the stress strain nephograms and natural frequency and vibration pattern diagrams were obtained.The results show that the structural strength of the manipulator meets the design requirements,and the resonance can be effectively avoided in work.It provides reference for the further optimization design of the manipulator. |
| |
| Keywords: | |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《机床与液压》浏览原始摘要信息 |
|
点击此处可从《机床与液压》下载全文 |
|
