| 基于粗集方法的机床热补偿误差的温度测点优化 |
| |
| 引用本文： | 张海燕,曾黄麟,唐建芳.基于粗集方法的机床热补偿误差的温度测点优化[J].机床与液压,2010,38(1). |
| |
| 作者姓名： | 张海燕 曾黄麟 唐建芳 |
| |
| 作者单位： | 四川理工学院,四川自贡,643000 |
| |
| 基金项目： | 四川省教育厅基础应用研究课题(2008A140)基金资助 |
| |
| 摘 要： | 机床热误差是影响机床加工精度稳定性的最大误差源,因此减小热误差对提高机床的加工精度至关重要。采用粗集理论对机床热变形建模及补偿技术中温度测点的选择进行优化,以HMC800A立式三轴加工中心温度测点的选择为例进行研究,结果表明该方法能有效地减少温度测点数量,既可以保证模型的精度,又可节省工作量。
|
| 关 键 词： | 数控机床 测点优化 热误差补偿 粗集理论 |
Optimization for Temperature Measurement Points of Compensating Thermal Error on Machine Tools Based on Rough Sets |
| |
| ZHANG Haiyan,ZENG Huanglin,TANG Jianfang.Optimization for Temperature Measurement Points of Compensating Thermal Error on Machine Tools Based on Rough Sets[J].Machine Tool & Hydraulics,2010,38(1). |
| |
| Authors: | ZHANG Haiyan ZENG Huanglin TANG Jianfang |
| |
| Affiliation: | Sichuan University of Science and Engineering;Zigong Sichuan 643000;China |
| |
| Abstract: | Thermal error on machine tools is one of the biggest error sources that affect the stability of machining precision.It is very important to reduce the thermal error for improving the machining precision.The model of thermal deformation was optimized and the number of temperature measurement points of compensating thermal error on machine tools was reduced based on the theory of rough sets.An optimization example of the measurement points was made on the HMC800A type three-axis vertical machining center.The ... |
| |
| Keywords: | NC machine tool Measurement point optimization Thermal error compensation Rough sets |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
