| 继电保护设备柜体的螺栓焊接 |
| |
| 引用本文： | 王青阳.继电保护设备柜体的螺栓焊接[J].电焊机,2008,38(2):74-75. |
| |
| 作者姓名： | 王青阳 |
| |
| 作者单位： | 阿城继电器股份有限公司,黑龙江,哈尔滨,150302 |
| |
| 摘 要： | 现在柜体表面大多采用静电喷涂,板面对螺栓焊接质量要求很高.采用螺栓闪光电阻焊代替焊条电弧焊焊接螺栓,其可靠性高,焊后对板面无烧伤,且能够提高产品质量、降低成本、提高功效.经试验证实完全可以满足产品质量要求.
|
| 关 键 词： | 闪光电阻焊 拉伸 断裂 螺栓 钢板 继电保护设备 柜体 焊接螺栓 panel protection weld 提高产品质量 完全 验证 高功效 降低成本 烧伤 焊条电弧焊 电阻焊 质量要求 板面 静电喷涂 体表面 |
| 文章编号： | 1001-2303（2008）02-0074-02 |
| 收稿时间： | 2008-01-14 |
| 修稿时间： | 2008年1月14日 |
Bolt weld of relaying protection panel |
| |
| WANG Qing-yang.Bolt weld of relaying protection panel[J].Electric Welding Machine,2008,38(2):74-75. |
| |
| Authors: | WANG Qing-yang |
| |
| Abstract: | The static spray painting is adopted on the surface of the cabinet widely,because the boards are demanded with high weld quality,SMAW is replaced by the flash resistance weld.One aspect it is with high in reliability;In another hand the surface of the board is not burn easily,and the product quality and the production efficiency are increased,the cost is also reduced.Practice experiments show that it meets the requirements of the product quality completely. |
| |
| Keywords: | |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
