首页 | 本学科首页   官方微博 | 高级检索  
     

金刚石与硬质合金钎焊接头应力场分析
引用本文:徐超,孙凤莲,秦优琼,孟工戈.金刚石与硬质合金钎焊接头应力场分析[J].焊接学报,2003,24(2):47-50.
作者姓名:徐超  孙凤莲  秦优琼  孟工戈
作者单位:哈尔滨理工大学,哈尔滨,150080
基金项目:黑龙江省自然科学基金资助项目 (E0 1-2 1)
摘    要:采用ANSYS有限元数值模拟软件,运用瞬态非线性分析的方法,模拟出以Ag—Cu—Ti为钎料的金刚石与硬质合金钎焊接头的焊后应力场,并预报出钎缝厚度对钎焊接头应力大小和分布的影响,从而分别得出焊后金刚石层、钎料层与硬质合金区域的应力场分布,通过对应力场彩云图以及数据组的综合分析,找到焊后应力集中的危险区域;在数控真空钎焊炉中进行钎焊试验,由于施加压力的不同,得出钎缝厚度不同的焊接试件。而后进行抗剪强度试验,得出了钎料层厚度并不是越厚越好,而是存在一个最佳值的规律,计算所得规律与试验结果基本吻合。

关 键 词:金刚石  硬质合金  钎焊接头  应力场  有限元
文章编号:0253-360X(2003)02-47-04
收稿时间:2002/8/2 0:00:00

Stress field analysis of brazed joint between diamond and hard alloy
XU Chao,SUN Feng lian,QIN You qiong and MENG Zi ge.Stress field analysis of brazed joint between diamond and hard alloy[J].Transactions of The China Welding Institution,2003,24(2):47-50.
Authors:XU Chao  SUN Feng lian  QIN You qiong and MENG Zi ge
Affiliation:Harbin Uninersity of Siance and Technology, Harbin 150080, China,Harbin Uninersity of Siance and Technology, Harbin 150080, China,Harbin Uninersity of Siance and Technology, Harbin 150080, China and Harbin Uninersity of Siance and Technology, Harbin 150080, China
Abstract:Using ANSYS finite element software,the stress field of brazed joint which brazing filler metal is Ag Cu Ti was simulated between diamond and hard alloy by the means of the transient nonlinear analysis,it is predicted that the filler metal thickness has effect on residual stress and its distribution .Accordingly,the stress field of the region of diamond ,filler metal and hard alloy is obtained and then the danger region in stress field is found by the analysis to various data groups.The brazing experiment is finished in vacuum furnace,the brazed joints with different filler metal thickness are obtained by different pressure on them.The shearing strength tests indicate it isn't that the more the thickness of filler metal is,the less stress in the filler metal is.The optimum thickness of filler layer exists.The experiment results agree with the calculated results.
Keywords:ANSYS  finite element  welding stress
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《焊接学报》浏览原始摘要信息
点击此处可从《焊接学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号